User guide

33Fabric OS 4.4.x release notes
The message displayed when Web
Tools license is removed, and later
added, is inaccurate.
Fixed.
syslogd does not send out the right
number of errors to host.
Fixed.
When the secmodeenable fails due to
the absence of certificates on multiple
switches in the fabric, an error is
reported for only one of the switches
missing a certificate.
Fixed.
If you set the fan threshold below the
current fan value, fanshow indicates
that the fan is still OK.
Fixed.
Zone DB propagation may seem slow.
Fixed.
GATIN will return an accept for a
non-existent port in the fabric.
Fixed.
A single security violation error entry is
logged when multiple similar violations
originating from different IP addresses
are detected.
Fixed.
Switch panic with out of memory when
doing continuously HBA reset.
Fixed.
The error "SEC-RSENDFAIL, 2, RCS
process fails: Bad RCA" message is
reported during a zone merge test. The
fabric still forms correctly.
Fixed.
Ethernet port LEDs for the SAN Switch
2/8V and 2/16V are not shown in the
Web Tools Switch View.
Also, no SAN Switch 2/8V and 2/16V
LEDs are shown for the Ethernet Port.
Fixed.
Table 5 Closed issues for Fabric OS 4.2.2a (continued)
Fabric OS 4.2.2a Issue Status