User guide

Closed issues from previous 4.2.2a release32
When setting fcpProbeDisable to 1
through configure command
fcAL.fanFrameDisable will
automatically be set to 1.
Fixed.
Web Tools displays an incorrect value
for the current value on smart SFPs.
Fixed.
AddSetMember failing to add License
key to switch, when 4.1.1 is proxy and
other F/W is target.
Fixed.
SNMP FW-BELOW Trap for EnvFan is
not sent after haFailover.
Fixed.
Web Tools and CLI event time are not
the same when the tstimezone is
configured. When the tstimezone is
not configured then the event times
match.
Fixed.
Web Tools Does Not Show Duplicate
Entries Contained In Zoning On Switch.
Fixed.
156146 Blades Posting Missing From
ErrorLog/Eventlog Messsages.
Fixed.
9830202 Intuit can't set FCIP address
on the SAN Switch 4/32.
Fixed.
Switch gets into a state where all SNMP
queries to ConnUnitEvent table timeout.
Fixed.
The wrong output displays via the
portCfgShow command.
Fixed.
After firmware download to a Core
Switch 2/64, an API application does
not receive download completion event.
Fixed.
Table 5 Closed issues for Fabric OS 4.2.2a (continued)
Fabric OS 4.2.2a Issue Status