User guide

31Fabric OS 4.4.x release notes
Failover during hardware configuration
operations may leave the port in an
inconsistent state.
Fixed.
Activating Trunking at the switch level
(switchCfgTrunk) when a
long-distance port is currently
configured causes the error message
"No Trunking support of long distance
port" to be displayed, which is correct.
However, other trunk ports are then left
in a disabled state.
Fixed.
Trying to commit after creating an alias
that's about 128K would fail with -55
(ERR_COMMIT_FAILED) while using a
Core Switch 2/64 in a secure fabric as
proxy.
Fixed.
Able to reset version time stamp when
logged in as "user".
Fixed.
Trying to Activate a ZoneSet that's
about 128K, the AddObjectAttribute()
call returns -56 after around one
minute.
Fixed.
Attempting to retrieve the security
policy via the Fabric Access API
immediately after activating a new SCC
policy will cause the retrieval command
to fail.
Fixed.
Attempting to retrieve the security
policy via the Fabric Access API
immediately after activating a new SCC
policy will cause the retrieval command
to fail.
Fixed.
Some zone groups are lost on a CP
failover.
Fixed.
Table 5 Closed issues for Fabric OS 4.2.2a (continued)
Fabric OS 4.2.2a Issue Status