User guide

Closed issues from previous 4.2.2a release30
An update to the standards protocols
was made for the GATIN command,
and the new modes are not supported
This is a MS command used to discover
the topology of the fabric.
Fixed.
No log message is generated when one
CP resets the other CP.
Fixed.
When configuring a route the user may
in a rare instance receive an incorrect
error message "Input port not available
for routing".
Fixed.
The disable event is being reported
twice via the API. The two events being
reported are "Trunking port down"
followed by "Port Down".
Fixed.
Users who attempt to upgrade switch
firmware from Fabric Manager or Web
Tools, will see a time difference of 8
hours.
Fixed.
Wrong value in Enterprise field of
coldStart Trap from SAN Switch 4/32
(FOS v4.0.2c)
Fixed.
In the Web Tools display, when a trunk
group is segmented, only the trunk
master is shown with a blinking light
indicating an error. The other links in
the trunk continue to be shown with a
solid green light, suggesting no error.
Fixed.
Vendor specific part number of the
switch is not accessible thru SNMP.
Vendor specific soft serial number can
be accessed thru swSsn (SW mib), if
the ssn entry is available in
configuration database. Otherwise,
swSsn gives the WWN of the switch.
Fixed.
Table 5 Closed issues for Fabric OS 4.2.2a (continued)
Fabric OS 4.2.2a Issue Status