User guide

Closed issues from previous 4.2.2a release26
Mechanism needed to monitor or
prevent all instances of compact flash
using 100% of capacity.
Under some rare circumstances, the
flash file system fills up completely.
Fixed.
Switch reboot with CF Error: hda: status
timeout ...
Fixed.
Switch: 0, Critical
SCN-SCNQ_OVERFLOW, 1, SCN
queue overflow for nsd
Fixed.
Unable to activate NoNodeWWNZoning
with just the cfgenable command.
Workaround: Use cfgdisable
followed by cfgenable, instead of just
cfgenable.
Fixed.
SCAL WT: Critical error on SCN queue
overflow for weblinker.fcg after
disabling all trunks on core switches.
Fixed.
When frureplace procedure was
executed for a "bad wwn card," the
corrupted data on the bad card is
copied over to new card.
Fixed.
During a firmwaredownload
operation, if the power to the switch is
interrupted, the message "Oops kernel
access of bad area" may appear on the
console.
Fixed.
Web Tools shows wrong thermal
status.
Fixed.
Enc_out errors generated on ports with
nothing plugged into them other then
the SFP.
Fixed.
Table 5 Closed issues for Fabric OS 4.2.2a (continued)
Fabric OS 4.2.2a Issue Status