User guide

25Fabric OS 4.4.x release notes
Track Logging Feature does not detect
failure login to the switch via SSH.
Fixed.
Switch (active CP) reset when
switchdisable/enable script running.
Fixed.
Modifying switch and CP IP addresses
caused a telnet hang.
Fixed.
After fastbooting standby CP of the
primary FCS, doing secfcsfailover
before HA is in sync results in old
primary FCS switch's active CP
panicking.
Fixed.
Message "Oops: kernel access of bad
area, sig: 11" shows up and switch
reset.
Fixed.
Switch Status Marked As Healthy When
CF (compact Flash) 100% Full With
Write Errors.
Fixed.
After changing Ethernet IP address from
CLI or from WT, can not launch WT with
new IP address.
Fixed.
v4.1.1_rc2 Firmware Download Hangs
Switch After Critical SYSC-ERROR Seen.
Fixed.
SAN Switch 4/32 error and reboot:
'Critical
kSWD-kSWD_GENERIC_ERR_CRITICAL,
1, kSWD:
Fixed.
Switch Failed To Generate Any Event,
KSWD, Core Dump Notification After
RPCD Issue.
Fixed.
Table 5 Closed issues for Fabric OS 4.2.2a (continued)
Fabric OS 4.2.2a Issue Status