User guide
Closed issues from previous 4.2.2a release24
Closed issues from previous 4.2.2a release
Table 5 lists defects that have been closed since the last Fabric OS 4.x release, version 4.2.2a.
Table 5 Closed issues for Fabric OS 4.2.2a
Fabric OS 4.2.2a Issue Status
Switch is rebooting Fabric OS version
4.0.0.c.
Fixed.
Compact Flash is full due to large wtmp
file
Fixed.
Core Switch 2/64 fails to come online to
MVS - Command Rejects.
Fixed per the following solution:
Read Port Descriptor command
wasn't setting 'Port Address Not
Implemented' bit correctly for
area 0xFF. Due to this MVS to
fail bring CUP online. The fix is
to set 'Not implemented' bit for
area 0xFF.
Unsupported version 2/3 Name Server
entry object caused switch fail to interop
with specific vendor switch.
Fixed.
During zone merge of zone DB > 55k,
zoning block transmit task and causes
fab reconfiguration.
Fixed.
Switch panic when removing cables. Fixed.
Switch is not sending RSCN, after target
device registers to name server with
RFT_ID
Fixed.
QLV2352 HBA speed negotiation
problem in 2 Gb/s switch
Fixed.
Host cannot see the target on a remote
switch.
Fixed.