Specifications

5Fabric OS 4.4.0f release notes
Supported switches
Fabric OS v4.4.0f supports the following switches:
• HP StorageWorks SAN Switch 2/8V
• HP StorageWorks SAN Switch 2/16V
• HP StorageWorks SAN Switch 2/16N
• HP StorageWorks SAN Switch 2/32
• HP StorageWorks Core Switch 2/64
• HP StorageWorks SAN Director 2/128
• HP StorageWorks SAN Switch 4/32
Technical support
Contact Hewlett-Packard support for hardware, firmware, and software support, including product
repairs and part ordering. To assist your support representative and to expedite your call, have the
following information available:
• Technical support contact number, if available
• Switch model
• Switch operating system version
• Error messages received
• Output from supportshow command
• Detailed problem description and specific questions
• Description of any troubleshooting steps already performed and results
Switch Serial Number
The serial number label location varies with switch model, as follows:
• For the SAN Switch 2/8V, SAN Switch 2/16V, SAN Switch 2/16N and SAN Switch 2/32
models, the label is on the rear chassis panel.
• For the SAN Switch 4/32, the label is on the switch ID pull-out tab located on the port side, and
on the inside of the chassis, near the Power Supply 1.
• For the Core Switch 2/64 and SAN Director 2/128, the label is on the inside front of the
chassis, on the wall to left of the ports.