Specifications

HP StorageWorks Fabric OS 4.x command reference guide, part number: AA-RVHVA-TE26
On page 223:
Under fportTest, in the “Operands” section, replace the –seed and –width operand
descriptions as follows:
–seed payload_pattern
Specify the pattern of the test packets payload. Valid values are:
–width pattern width
Specify the width of the pattern that the user specified. When payload_pattern is set to
0x00, pattern_width is ignored. Valid values are:
On page 268:
Under historyShow, in the “Description” section, add the following text:
The Core Switch 2/64 and the SAN Director 2/128 support 50 records. Other switch
models, which contain field-replaceable units (FRUs), support 28 records.
On page 639:
Under supportSave, in the “Description” section, replace the following text:
Use this command to save RASLOG, TRACE, and supportShow information for the local
CP to a remote FTP location.
with this text:
Use this command to save RASLog, TRACE, and supportShow (active CP only)
information for the local CP to a remote FTP location.
0CSPAT (default)
1BYTE_LFST
2 CHALF_Sq
3QUAD_NOT
4CQRT_SQ
5CRPAT
6RANDOM
1byte (default)
2word
3 quad