Specifications

Advanced Web Tools updates24
WWN card FRU repair If an HA failover or power cycle occurs during a FRU replacement on the
WWN card, the Core Switch 2/64 or SAN Director 2/128 becomes
nonoperational.
CAUTION: When performing a FRU replacement on a WWN card,
complete the FRU procedure before attempting an HA failover or power
cycling the chassis.
Zoning Issue: Domain 0 in a zoning configuration file is invalid but has not been
previously enforced.
Workaround: Before upgrading a switch to Fabric OS 4.2.x or later, ensure
that the fabric’s zoning configuration does not contain domain ID 0, which
is used for zoning. This is specific only to 4.x switches.
Zoning When enabling a new zone configuration, the user must ensure that the size
of the zone configuration does not exceed the minimum size supported by
all the switches in the fabric. Zone configuration sizes can be determined by
executing cfgsize on all the switches in the fabric.
Table 6 Fabric OS area information (continued)
Fabric OS Area Description