User guide

Table 12 Fabric OS 7.0.0c closed defects (continued)
SolutionClosed fixes summary
Fixed in Fabric OS 7.0.0c.The WebTools Extended Fabric sub tab incorrectly displays the port speed
as 0 for ports configured as N16 for all 16 Gbps switches. This is a display
problem only and does not affect operation of the switches.
Fixed in Fabric OS 7.0.0c.The diagshow diagnostic command displays incorrect speed values for
ports on the HP DC SAN Director 10/24 FCoE Blade by displaying the
back end 4 Gbps ports rather than the expected front end 10 Gbps ports.
Fixed in Fabric OS 7.0.0c.Detection of a stuck Virtual Channel may be intermittently delayed by several
minutes to more than an hour, but will eventually be detected.
Effective date
December 2011
56