Technical data

Fixed in Fabric OS 5.3.2
Port Peak Data Rate read from the SMI
interface shows incorrect values that ex-
ceed the speed of the switch. Invalid
Tx/Rx rate can be computed if a polling
cycle takes place when a domain name
has not been assigned.
Fixed in Fabric OS 5.3.2
CALD memory leak seen when querying
EnumerateAssociatedIn-
stanceKeys on Phantom_switch to
PhantomPort.
Fixed in Fabric OS 5.3.2
The value of sfpshow no longer updates
after hafailover.
Fixed in Fabric OS 5.3.2
Too many FW-5002 messages causes a
FFDC to be generated.
Fixed in Fabric OS 5.3.2
nsd daemon is running out of memory.
Fixed in Fabric OS 5.3.2
Switch experienced out-of-memory condi-
tion in interopmode with nsd being
killed.
Fixed in Fabric OS 5.3.2
Web Tools does not work well in NAT
environment.
Fixed in Fabric OS 5.3.2
After security network scan of switch,
IPADMd is no longer running.
Fixed in Fabric OS 5.3.2
Workaround—Reset SFPs to avoid quad-rate mode.
Speed Negotiation fails on 4Gb quad-
rate, long-wave 4Km SFPs.
Fixed in Fabric OS 5.3.2
4Gb switch running at fixed 2Gb speed
may not respond to FLOGI from HBA us-
ing auto-speed negotiation.
Fixed in Fabric OS 5.3.2
Web Tools zone admin alias displays
duplicate PWWN on 48-port blade card.
Fixed in Fabric OS 5.3.2
Fabric OS 5.3.0c Web Tools zone sort
by member of Alias and member of zone
is out of order.
22