Technical data

Closed with Code Change in Fabric OS v7.0.1
Fabric OS v7.0.1a Release Notes v1.0 Page 56 of 74
Defect ID: DEFECT000363794
Technical Severity: Medium
Summary: Out of order frames seen during Core blade removal/insertion with Lossless feature
enabled.
Symptom: When running traffic across a core blade, out-of-order frames (OOO) are seen when a core
blade is removed and when a core blade is inserted.
Feature: 8G Platform Services
Function: Routing
Probability: Low
Found in Release: FOS7.0.0
Defect ID: DEFECT000364788
Technical Severity: Medium
Summary: Unreliable speed negotiation may be encountered when BR5470 Cu ports are connected to
a 3rd party HBA.
Symptom: 3rd party HBA's are not properly negotiating to the correct speeds
Workaround: No
Feature: 8G ASIC Driver
Function: PORT
Probability: Medium
Found in Release: FOS6.3.2
Where Else Fixed: FOS6.4.2 b GA
Defect ID: DEFECT000366323
Technical Severity: Medium
Summary: FICON - IEBCOPY job fails during read pipelining on the Brocade 7800/FX8-24 blade.
Symptom: IEBCOPY may fail when read pipelining is enabled. Other tape jobs will not be impacted
Feature: FCIP
Function: Emulation
Probability: High
Found in Release: FOS6.4.0
Service Request ID: 658691
Defect ID: DEFECT000367452
Technical Severity: Medium
Summary: Using "switchcfgpersistentdisable/enable" can result is subsequent issues with zoning
distribution.
Symptom: Zone DB distribution fails to reach all domains in the fabric.
Feature: Field Escalation
Function: Management Embedded
Probability: Low
Found in Release: FOS6.4.1
Service Request ID: 665233
Defect ID: DEFECT000370040
Technical Severity: Medium
Summary: Getting ―No access‖ response while querying any table via an SNMPv3 "user-defined" user
that is assigned to a particular Logical Fabric.
Symptom: Customer is not be able to contact the switch the first time and also will not be able to get
complete query results.
Feature: Mgmt Embedded - SNMP
Function: Other
Probability: Low
Found in Release: FOS7.0.0
Service Request ID: 697903