Technical data

Closed with Code Change in Fabric OS v7.0.1
Fabric OS v7.0.1a Release Notes v1.0 Page 47 of 74
Defect ID: DEFECT000364799
Technical Severity: High
Summary: After downgrading from v7.0.0 to v6.4.x, a route rebalance or recalculation will cause some
ICL paths to be blocked.
Symptom: Connectivity between devices lost after route change.
Workaround: Disable all ICL ports and then enable all ICL ports.
Feature: UNDETERMINED
Function: UNDER REVIEW
Probability: High
Found in Release: FOS6.4.2
Defect ID: DEFECT000364945
Technical Severity: High
Summary: Unable create 4th tunnel with crossport circuits in chassis with multiple FX8-24 blades.
Symptom: Unable create more than three tunnels with crossport circuit configuration in a chassis with
multiple FX8-24 blades.
Feature: FCIP
Function: Other
Probability: High
Found in Release: FOS7.0.0
Defect ID: DEFECT000365069
Technical Severity: High
Summary: ICL Ports on 8510 directors show "Mod_Val" on 1 out of 4 ports on a QSFP.
Symptom: Event log indicates bad QSFP requiring reseat or replacement.
Workaround: Reseating QSFP may correct the issue.
Feature: 16G Hardware
Function: 16G QSFP
Probability: Low
Found in Release: FOS7.0.0
Defect ID: DEFECT000365071
Technical Severity: High
Summary: QSFP port status is not refreshed in WebTools port admin window.
Symptom: Insertion/Removal of QSFP is not reflected in Port Admin window.
Workaround: Refresh, or close and re-open Port Admin window.
Feature: WebMgmt
Function: Ports Admin
Probability: Medium
Found in Release: FOS7.0.0
Defect ID: DEFECT000365075
Technical Severity: High
Summary: QSFP ICL ports are being fenced due to excessive state changes even though current high
threshold value is not exceeded
Symptom: QSFP ICL links are getting fenced unexpectedly.
Feature: FABRIC WATCH
Function: PORT FENCING
Probability: Low
Found in Release: FOS7.0.0