Technical data

Closed with Code Change in Fabric OS v7.0.1
Fabric OS v7.0.1a Release Notes v1.0 Page 43 of 74
Defect ID: DEFECT000345301
Technical Severity: High
Summary: In FCR configurations with Speed Tags, if LSAN Binding is added, binding is not being
properly enforced.
Symptom: If LSAN Binding is added to an FCR configuration with Speed Tags already defined, binding
may not be properly enforced and devices may not get properly imported/exported.
Workaround: Removal of stale configuration.
Feature: 8G FCR
Function: FCR Daemon
Probability: Medium
Found in Release: FOS7.0.0
Defect ID: DEFECT000346417
Technical Severity: High
Summary: Data Encryption: if tape device is improperly identified as a disk device, BES could hang
and go faulty.
Symptom: BES switch is hanging/going faulty and stopping all tape backup operations.
Seeing message [CVLC-1009], ... Wrong device type: should be tape, found disk.
Feature: Field Escalation
Function: Encryption
Probability: Low
Found in Release: FOS6.4.0
Service Request ID: 585157
Where Else Fixed: FOS6.4.2 a
Defect ID: DEFECT000348660
Technical Severity: High
Summary: After FCIP links in an FCR backbone fabric bounce several times, FCR is not translating all
SID/DIDs properly.
Symptom: Customer cannot access device after the FCIP links have bounced multiple times. Frames
with same SID/DID were sent to device after proxy translation failed in a backbone to edge
FCR setup.
Feature: Field Escalation
Function: FCR
Probability: Low
Found in Release: FOS6.2.2
Service Request ID: 602521
Where Else Fixed: FOS6.3.2 c, FOS6.4.2 a
Defect ID: DEFECT000349150
Technical Severity: High
Summary: BES set to faulty, due to I/O sizes greater than 512KB starting at LBA 0 for a encrypted
LUN
Symptom: BES goes faulty without clear indication of the reason
Feature: Data Security
Function: Disk Encryption
Probability: Low
Found in Release: FOS7.0.0
Where Else Fixed: FOS6.4.2 a