Technical data

Closed with Code Change in Fabric OS v7.0.1a
Fabric OS v7.0.1a Release Notes v1.0 Page 36 of 74
Defect ID: DEFECT000385320
Technical Severity: Medium
Summary: FICON Selective resets during sort tape job with large channel programs when running
through FICON to ESCON converter and FCIP FICON Tape Pipelining.
Symptom: Customer sees the tape application fail with MIH error.
Feature: FCIP
Function: FCIP I/O
Probability: Low
Found in Release: FOS7.0.1
Defect ID: DEFECT000386728
Technical Severity: Medium
Summary: FICON Printer Emulation enabled encounters DP Panic with 3900 type printers
Symptom: FCIP Complex DP reset, FCIP Tunnel failure (on the peer side).
Feature: FCIP
Function: Emulation
Probability: High
Found in Release: FOS7.0.1
Defect ID: DEFECT000387371
Technical Severity: Medium
Summary: Replication application getting errors after upgrading from FOSv6.4.1_fcoe to FOSv7.0.x
with FCIP emulation
Symptom: Customer will get failures in Teradata replication
Feature: Field Escalation
Function: FCIP
Probability: High
Found in Release: FOS7.0.0
Service Request ID: 706489
Defect ID: DEFECT000388672
Technical Severity: Medium
Summary: FCIP tunnel bounces on 7800, high emulated IO can cause local keep alive timeout
Symptom: Customer will get FICON keep alive timeout if there is not enough bandwidth on the FCIP
tunnel.
Feature: Field Escalation
Function: FCIP
Probability: Low
Found in Release: FOS6.4.1
Service Request ID: 670797