Technical data

Fabric Manager Administrator’s Guide 11-17
Publication Number: 53-1000196-01-HP
Using Baseline Configurations for Configuration Management
11
Figure 11-16 Compare/Download from File
2. Navigate to the baseline file and click Open.
The Compare/Download from File -- Target Switch Selection window opens.
3. From the SAN Elements tab, select the switches that you want to compare to the baseline file and
click the right-arrow or drag the switches to move them to the right-hand window.
You can use Ctrl-click or Shift-click to select multiple switches.
4. Click OK.
The Compare/Download from File -- Switch Configuration comparison and Download window
displays and compares the configurations of the switches to the baseline (see Figure 11-17).
5. Click Apply Baseline to apply this baseline to the switches that you selected.
Figure 11-17 Switch Configuration Comparison
Note
In a Solaris environment, ensure that you select a directory and not the actual file to
compare the configuration against.