Technical data

Configuring HA FWLB
May 31, 2012 © 2012 Brocade Communications Systems, Inc. 5 - 21
SI-StandbyB(config-rs-tc-2)# fwall-info 9 2/1 20.20.8.120 20.20.8.120
SI-StandbyB(config-rs-tc-2)# fw-predictor per-service-least-conn
SI-StandbyB(config-rs-tc-2)# exit
SI-StandbyB(config)# vlan 1 name DEFAULT-VLAN by port
SI-StandbyB(config-vlan-1)# always-active
SI-StandbyB(config-vlan-1)# no spanning-tree
SI-StandbyB(config-vlan-1)# static-mac-address 0004.80ed.17b4 ethernet 3/1 priority
1 router-type
SI-StandbyB(config-vlan-1)# static-mac-address 0004.80f0.4b3c ethernet 3/2 priority
1 router-type
SI-StandbyB(config-vlan-1)# static-mac-address 0004.80ed.1368 ethernet 3/3 priority
1 router-type
SI-StandbyB(config-vlan-1)# static-mac-address 0004.80eb.5294 ethernet 3/4 priority
1 router-type
SI-StandbyB(config-vlan-1)# exit
SI-StandbyB(config)# vlan 999 by port
SI-StandbyB(config-vlan-999)# untagged ethe 2/7 to 2/8
SI-StandbyB(config-vlan-999)# no spanning-tree
SI-StandbyB(config-vlan-999)# exit
SI-StandbyB(config)# hostname Ext-SI-B
SI-StandbyB(config)# ip address 20.20.8.111 255.255.255.0
SI-StandbyB(config)# ip default-gateway 20.20.8.120
SI-StandbyB(config)# auto-cam-repaint
SI-StandbyB(config)# pram-write-retry
SI-StandbyB(config)# write memory
SI-StandbyB(config)# end
SI-StandbyB(config)# reload
Internal ServerIron C (Int-SI-C) Configuration
SI-ActiveC(config)# module 1 bi-0-port-wsm2-management-module
SI-ActiveC(config)# module 2 bi-jc-8-port-gig-module
SI-ActiveC(config)# module 3 bi-jc-16-port-gig-copper-module
SI-ActiveC(config)# trunk switch ethe 2/5 to 2/6
SI-ActiveC(config)# server fw-port 2/5
SI-ActiveC(config)# server router-ports ethernet 2/1
SI-ActiveC(config)# server fw-name fw1 10.10.2.1
SI-ActiveC(config-rs-FW1)# other-ip 10.10.8.1
SI-ActiveC(config-rs-FW1)# port http
SI-ActiveC(config-rs-FW1)# port http no-health-check
SI-ActiveC(config-rs-FW1)# port http url "HEAD /"
SI-ActiveC(config-rs-FW1)# exit
SI-ActiveC(config)# server fw-name fw2 10.10.2.2
SI-ActiveC(config-rs-FW2)# other-ip 10.10.8.2
SI-ActiveC(config-rs-FW2)# port http
SI-ActiveC(config-rs-FW2)# port http no-health-check
SI-ActiveC(config-rs-FW2)# port http url "HEAD /"
SI-ActiveC(config-rs-FW2)# exit
SI-ActiveC(config)# server fw-name fw3 10.10.2.3
SI-ActiveC(config-rs-FW3)# other-ip 10.10.8.3
SI-ActiveC(config-rs-FW3)# port http
SI-ActiveC(config-rs-FW3)# port http no-health-check
SI-ActiveC(config-rs-FW3)# port http url "HEAD /"
SI-ActiveC(config-rs-FW3)# exit
SI-ActiveC(config)# server fw-name fw4 10.10.2.4
SI-ActiveC(config-rs-FW4)# other-ip 10.10.8.4
SI-ActiveC(config-rs-FW4)# port http
SI-ActiveC(config-rs-FW4)# port http no-health-check
SI-ActiveC(config-rs-FW4)# port http url "HEAD /"