Technical data

3-14 Fabric OS MIB Reference Manual
Publication Number: 53-0000521-08
Status Group
3
fcFxPortPhysEntry
OID 1.3.6.1.2.1.75.1.2.2.1
Description An entry containing physical level status and parameters of an Fx_Port.
Index fcFeModuleIndex
fcFxPortIndex
fcFxPortPhysAdminStatus
OID 1.3.6.1.2.1.75.1.2.2.1.1
Description The desired state of the Fx_Port. A management station might place the Fx_Port in a
desired state by setting this object accordingly. Possible values are:
online (1) Place port online.
offline (2) Take port offline.
testing (3) Initiate test procedures.
The testing state (3) indicates that no operational frames can be passed. When a fabric
element initializes, all Fx_Ports start with fcFxPortPhysAdminStatus in the offline
state (2). As the result of either explicit management action or per configuration
information accessible by the fabric element, fcFxPortPhysAdminStatus is then
changed to either the online (1) or testing (3) states or remains in the offline state (2).
fcFxPortPhysOperStatus
OID 1.3.6.1.2.1.75.1.2.2.1.2
Description The current operational status of the Fx_Port. Possible values are:
online (1) Login might proceed.
offline (2) Login cannot proceed.
testing (3) Port is under test.
linkFailure (4) Failure after online/testing.
The testing state (3) indicates that no operational frames can be passed. If
fcFxPortPhysAdminStatus is offline (2), then fcFxPortPhysOperStatus should be
offline (2). If fcFxPortPhysAdminStatus is changed to online (1), then
fcFxPortPhysOperStatus should change to online (1) if the Fx_Port is ready to accept
fabric login request from the attached Nx_Port; it should proceed and remain in the
linkFailure (4) state only if there is a fault that prevents it from going to the online
state (1).
fcFxPortPhysLastChange
OID 1.3.6.1.2.1.75.1.2.2.1.3
Description The value of sysUpTime at the time the Fx_Port entered its current operational status.
A value of 0 indicates that the Fx_Port operational status has not changed since the
agent last restarted.