Technical data

Fabric OS MIB Reference Manual 3-9
Publication Number: 53-0000521-08
Configuration Group
3
fcFeModuleObjectID
OID 1.3.6.1.2.1.75.1.1.4.1.3
Description The vendor’s authoritative identification of the module. This value might be allocated
within the SMI enterprises subtree (1.3.6.1.4.1) and provides a straightforward and
unambiguous means for determining what kind of module is being managed.
For example, this object could take the value 1.3.6.1.4.1.99649.3.9 if vendor “Neufe
Inc.” was assigned the subtree 1.3.6.1.4.1.99649 and had assigned the identifier
1.3.6.1.4.1.99649.3.9 to its “FeFiFo-16 PlugInCard.”
Note Refer to “sysObjectID” on page 2-6.
fcFeModuleOperStatus
OID 1.3.6.1.2.1.75.1.1.4.1.4
Description Indicates the operational status of the module:
online (1) The module is functioning properly.
offline (2) The module is not available.
testing (3) The module is under testing.
faulty (4) The module is defective in some way.
fcFeModuleLastChange
OID 1.3.6.1.2.1.75.1.1.4.1.5
Description Contains the value of sysUpTime when the module entered its current operational
status. A value of 0 indicates that the operational status of the module has not changed
since the agent last restarted.
fcFeModuleFxPortCapacity
OID 1.3.6.1.2.1.75.1.1.4.1.6
Description The number of Fx_Ports that can be contained within the module. Within each
module, the ports are uniquely numbered in the range from 1 to
fcFeModuleFxPortCapacity, inclusive. However, the numbers are not required to be
contiguous.
Note The valid values are as follows:
SilkWorm 3200 and 3250 8
SilkWorm 3800 and 3850 16
SilkWorm 3900 and 4100 32
SilkWorm 12000 64
SilkWorm 24000 128