Technical data

8-46 Fabric OS MIB Reference Manual
Publication Number: 53-0000521-08
Revision Number Scalar
8
trapRegRowState
OID 1.3.6.1.3.94.2.3.1.4
Description Specifies the state of the row. This entry always returns rowActive and allows for
read-only.
Revision Number Scalar
revisionNumber
OID 1.3.6.1.3.94.3
Description This is the revision number for this MIB. The format of the revision value is as
follows:
0 = High order major revision number
1 = Low order major revision number
2 = High order minor revision number
3 = Low order minor revision number
The value is stored as an ASCII value. The following is the current value of this
object:
0 = 0
1 = 3
2 = 0
3 = 0
This defines a revision of 03.00.
Note Set to 0300.
Table 8-3 TrapRegRowState for Read/Write
State Description (Read) Description (Write)
rowDestroy (1) Read: Can never happen. Write: Remove this row from the table.
rowInactive (2) Read: Indicates that this row
does exist but that traps are not
enabled to be sent to the target.
Write: If the row does not exist and the agent
allows writes to the trap table, then a new row is
created. The values of the optional columns are
set to default values. Traps are not enabled to be
sent to the target. If the row already existed, then
traps are disabled from being sent to the target.
rowActive (3) Read: Indicates that this row
exists and that traps are enabled
to be sent to the target.
Write: If the row does not exist and the agent
allows writes to the trap table, then a new row is
created. The values of the optional columns are
set to default values. Traps are enabled to be sent
to the target. If the row already exists, then traps
are enabled to be sent to the target.