Technical data

8-34 Fabric OS MIB Reference Manual

Publication Number: 53-0000521-08

Statistics Group

Note A Fibre Channel frame starts with SOF and ends with EOF. FC loop devices should

not count frames passed through. This value represents the sum total for all other Rx

objects.

connUnitPortStatCountTxElements

OID 1.3.6.1.3.94.4.5.1.6

Description The number of octets or bytes that have been transmitted by this port. There is an one-

second periodic polling of the port. This value is saved and compared with the next

polled value to compute net throughput.

Note For Fibre Channel, ordered sets are not included in the count.

connUnitPortStatCountRxElements

OID 1.3.6.1.3.94.4.5.1.7

Description The number of octets or bytes that have been received by this port. There is an one-

second periodic polling of the port. This value is saved and compared with the next

polled value to compute net throughput.

Note For Fibre Channel, ordered sets are not included in the count.

connUnitPortStatCountBBCreditZero

OID 1.3.6.1.3.94.4.5.1.8

Description The number of transitions in/out of BB credit zero state. The other side is not

providing any credit.

Note This is a Fibre Channel statistic only.

connUnitPortStatCountInputBuffersFull

Not supported.

OID 1.3.6.1.3.94.4.5.1.9

Description The number of occurrences when all input buffers of a port were full and outbound

buffer-to-buffer credit transitioned to 0. There is no credit to provide to other side.

Return Value: 80 0 0 0 0 0 0 0 (Not Supported)

Note This is a Fibre Channel statistic only.

connUnitPortStatCountFBSYFrames

OID 1.3.6.1.3.94.4.5.1.10

Description The number of times that FBSY was returned to this port as a result of a frame that

could not be delivered to the other end of the link. This occurs if either the Fabric or

the destination port is temporarily busy. Port can only occur on SOFc1 frames (the

frames that establish a connection).