Technical data

8-30 Fabric OS MIB Reference Manual
Publication Number: 53-0000521-08
Connectivity Group
8
Description This value is used to create a unique value for each entry in the link table with the
same connUnitLinkUnitId. The value can only be reused if it is not currently in use
and the value is the next candidate to be used. This value is allowed to wrap at the
highest value represented by the number of bits. This value is reset to 0 when the
system is reset and the first value to be used is 1.
Note Indexes 1 through maximum number of ports is reserved for ISL.
Indexes maximum number of ports + 1 and above are reserved for end devices and are
calculated based on portID of the end device(s).
connUnitLinkNodeIdX
OID 1.3.6.1.3.94.1.12.1.3
Description The node WWN of the unit at one end of the link. If the node WWN is unknown and
the node is a connUnit in the responding agent, then the value of this object must be
equal to its connUnitID.
Note WWN of the local switch.
connUnitLinkPortNumberX
OID 1.3.6.1.3.94.1.12.1.4
Description The port number on the unit specified by connUnitLinkNodeIdX, if known;
otherwise, -1. If the value is nonnegative, then it is equal to
connUnitPortPhysicalNumber.
Note ISL: Physical port number of the E_Port.
Device: Physical port # to which the device is connected.
connUnitLinkPortWwnX
OID 1.3.6.1.3.94.1.12.1.5
Description The port WWN of the unit specified by connUnitLinkNodeIdX, if known; otherwise,
16 octets of binary 0.
Note This is the WWN of the port to which the device is connected.
connUnitLinkNodeIdY
OID 1.3.6.1.3.94.1.12.1.6
Description The node WWN of the unit at the other end of the link. If the node WWN is unknown
and the node is a connUnit in the responding SNMP agency, then the value of this
object must be equal to its connUnitID.
Note ISL: WWN of the remote switch.
Device: Node name of the device.
connUnitLinkPortNumberY
OID 1.3.6.1.3.94.1.12.1.7