Technical data

8-24 Fabric OS MIB Reference Manual
Publication Number: 53-0000521-08
Connectivity Group
8
Description This is the internal port number by which this port is known. In many
implementations, this should be the same as connUnitPortIndex. Some
implementations might have an internal port representation not compatible with the
rules for table indices. In these cases, provide the internal representation of this port in
this object. This value might also be used in the connUnitLinkPortNumberX or
connUnitLinkPortNumberY objects of the connUnitLinkTable.
Note The internal port numbers for Brocade switch. The SilkWorm switches support 0
through maximum number of ports.
connUnitPortStatObject
OID 1.3.6.1.3.94.1.10.1.19
Description This contains the OID of the first object of the table that contains the statistics for this
particular port. If this has a value of 0, then there are no statistics available for this
port. The port type information helps identify the statistics objects found in the table.
From this point, use the getnext command to get the next statistics object. When the
first part of the OID changes, the end of table is reached.
Note Mapped to connUnitPortStatFabricUnitId.
connUnitPortProtocolCap
Not supported in Fabric OS v2.6.1.
OID 1.3.6.1.3.94.1.10.1.20
Description This is the bit mask that specifies the driver-level protocol capability of this port.
If this is not applicable, return all bits set to 0.
Return value = 07F
Note The bits have the following definition:
0 = unknown
1 = Loop
2 = Fabric
4 = SCSI
8 = TCP/IP
16 = VI
32 = FICON
connUnitPortProtocolOp
Not supported in Fabric OS v2.6.1.
OID 1.3.6.1.3.94.1.10.1.21
Description This is the bit mask that specifies the driver level protocol(s) that are currently
operational.
Return value = 07F
Note If this is not applicable, return all bits set to zero. The bits have the following
definition: