Technical data

Fabric OS MIB Reference Manual 8-23
Publication Number: 53-0000521-08
Connectivity Group
8
If the addressed connUnit allows this operation to be performed to this port, the
addressed port performs a vendor-specific offline operation. Examples of these
operations are
% Disabling a port's transceiver.
% The Link Failure protocol.
% Request (NON-PARTICIPATING) command to the loop port state machine
removal of the port from an arbitrated loop by a hub.
onlineConnUnitPort
If the addressed connUnit allows this operation to be performed to this port, the
addressed port performs a vendor-specific online operation. Examples of these
operations are
% Enabling a port's transceiver.
% The Link Failure protocol, request (PARTICIPATING) command to the loop port
state machine.
% Addition of the port from an arbitrated loop by a hub.
Each implementation might choose not to allow any or all of these values on a SET.
If the management station uses in-band communication (FC-IP) with the switch,
either of the two following actions might result in a loss of in-band communication
with the switch:
% Disabling the FC port that is connected to the management station
% Disabling the embedded port
Note Return values are:
resetConnUnitPort portDisable (F or E_Port, loop for U_Port)
bypassConnUnitPort portDisable (FL_Port)
unbypassConnUnitPort portEnable (FL_Port)
offlineConnUnitPort portDisable (E, F, FL_Port)
onlineConnUnitPort portEnable (U)
resetConnUnitPortCounters clear the port statistics counter. When rebooted, this
defaults to 1 (unknown).
connUnitPortName
OID 1.3.6.1.3.94.1.10.1.17
Description A string describing the addressed port.
Note This object is read-only for Brocade switches.
connUnitPortPhysicalNumber
OID 1.3.6.1.3.94.1.10.1.18