Technical data

Fabric OS MIB Reference Manual 5-53
Publication Number: 53-0000521-08
ASIC Performance Monitoring Group
5
swBlmPerfAlpaIndx
OID 1.3.6.1.4.1.1588.2.1.1.1.23.1.1.2
Description This object identifies the AL_PA index. There can be 126 AL_PA values.
swBlmPerfAlpa
OID 1.3.6.1.4.1.1588.2.1.1.1.23.1.1.3
Description This object identifies the AL_PA values. These values range between x'01' and x'EF'
(1 to 239). AL_PA value x'00' is reserved for FL_Port. If Alpha device is invalid, then
it will have -1 value.
swBlmPerfAlpaCRCCnt
OID 1.3.6.1.4.1.1588.2.1.1.1.23.1.1.4
Description Get CRC count for given AL_PA and port. This monitoring provides information on
the number of CRC errors that occurred on the frames destined to each possible
AL_PA attached to a specific port.
Note For the SilkWorm 4100, this value will always be 0. CRC counters are not supported
on this platform.
swBlmPerfEEMntTable
OID 1.3.6.1.4.1.1588.2.1.1.1.23.2
Description End-to-end monitoring counter table.
swBlmPerfEEMntEntry
OID 1.3.6.1.4.1.1588.2.1.1.1.23.2.1
Description End-to-end monitoring counter for given port.
Index swBlmPerfEEPort, swBlmPerfEERefKey
swBlmPerfEEPort
OID 1.3.6.1.4.1.1588.2.1.1.1.23.2.1.1
Description This object identifies the port number of the switch.
swBlmPerfEERefKey
OID 1.3.6.1.4.1.1588.2.1.1.1.23.2.1.2
Description This object identifies the reference number of the counter. This reference is a number
assigned when a filter is created. In the SNMP Index, start with one instead of 0, add
one to the actual reference key.