Technical data

5-30 Fabric OS MIB Reference Manual
Publication Number: 53-0000521-08
Fibre Channel Port Group
5
swFCPortTable
OID 1.3.6.1.4.1.1588.2.1.1.1.6.2
Description A table that contains, one entry for each switch port, configuration and service
parameters of the port.
swFCPortEntry
OID 1.3.6.1.4.1.1588.2.1.1.1.6.2.1
Description An entry containing the configuration and service parameters of the switch port.
Index swFCPortIndex
swFCPortIndex
OID 1.3.6.1.4.1.1588.2.1.1.1.6.2.1.1
Description The switch port index.
Note The physical port number of the switch, plus 1. The valid values for the SilkWorm
12000/24000 are 0 through maximum number of ports.
swFCPortType
OID 1.3.6.1.4.1.1588.2.1.1.1.6.2.1.2
Description The type of ASIC for the switch port. Possible values are:
stitch (1)
flannel (2)
loom (3) (SilkWorm 2000 series)
bloom (4) (SilkWorm 3250, 3850, 3900, 12000, and 24000)
rdbloom (5)
wormhole (6)
unknown (7) (SilkWorm 4100)
Note The valid value for the SilkWorm 3250, 3850, 3900, 12000, and 24000 is 4.
The valid value for the SilkWorm 4100 is 7.
All platforms from SilkWorm 4100 onwards will return a value of 7.
swFCPortPhyState
OID 1.3.6.1.4.1.1588.2.1.1.1.6.2.1.3
Description The physical state of the port. Possible values are:
noCard (1) No card is present in this switch slot.
noTransceiver (2)No Transceiver module in this port (Transceiver is the generic
name for GBIC, SFP, and so on).
laserFault (3) The module is signaling a laser fault (defective GBIC).
noLight (4) The module is not receiving light.
noSync (5) The module is receiving light but is out of sync.
inSync (6) The module is receiving light and is in sync.