Technical data

5-20 Fabric OS MIB Reference Manual
Publication Number: 53-0000521-08
System Group
5
swFlashDLPassword
OID 1.3.6.1.4.1.1588.2.1.1.1.1.16
Description The password to be used for FTP transfer of files in the download or upload
operation.
swBeaconOperStatus
OID 1.3.6.1.4.1.1588.2.1.1.1.1.18
Description The current operational status of the switch beacon. Possible values are:
on (1) The LEDs on the front panel of the switch run alternately from left
to right and right to left. The color is yellow.
off (2) Each LED is in its regular status, indicating color and state.
swBeaconAdmStatus
OID 1.3.6.1.4.1.1588.2.1.1.1.1.19
Description The desired status of the switch beacon. Possible values are:
on (1) The LEDs on the front panel of the switch run alternately from left
to right and right to left. Set the color to yellow.
off (2) Set each LED to its regular status, indicating color and state.
swDiagResult
OID 1.3.6.1.4.1.1588.2.1.1.1.1.20
Description The result of the power-on startup test (POST) diagnostics. Possible values are:
sw-ok (1) The switch is okay.
sw-faulty (2) The switch has experienced an unknown fault.
sw-embedded-port-fault (3) The switch has experienced an embedded port
fault.
swNumSensors
OID 1.3.6.1.4.1.1588.2.1.1.1.1.21
Description The number of sensors inside the switch.
Note For example, the SilkWorm 3800 value is between 1 and 13 (temperature = 6, fan = 3,
power supply = 4). The value might vary depending on the switch model. For Fabric
OS v4.x, if no sensor is available, this variable is assigned the value -1.
swSensorTable
OID 1.3.6.1.4.1.1588.2.1.1.1.1.22