Technical data

Fabric OS MIB Reference Manual 5-19
Publication Number: 53-0000521-08
System Group
5
swFwUpgraded (2) - The flash contains the image upgraded from the
swFlashDLHost.0.
swCfUploaded (3) - The switch configuration file has been uploaded to the host.
swCfDownloaded (4) - The switch configuration file has been downloaded from the
host.
swFwCorrupted (5) - The firmware in the flash of the switch is corrupted.
swFlashDLAdmStatus
Supported in Fabric OS v2.6.x and v3.x only.
OID 1.3.6.1.4.1.1588.2.1.1.1.1.12
Description The desired state of the flash.
The host is specified in swFlashDLHost.0. In addition, the user name is specified in
swFlashDLUser.0 and the file name specified in swFlashDLFile.0. Possible values
are:
swCurrent (1) The flash contains the current firmware image or
configuration file.
swCfUpload (3) The switch configuration file is to be uploaded to the host
specified.
swCfDownload (4) The switch configuration file is to be downloaded from the
host specified.
swFwCorrupted (5) The firmware in the flash is corrupted. This value is for
informational purposes only; however, setting swFlashDLAdmStatus to this
value is not allowed.
Note For more information about the configDownload and configUpload commands, refer
to the Fabric OS Reference Manual:
swFlashDLHost
OID 1.3.6.1.4.1.1588.2.1.1.1.1.13
Description The name or IP address (in dot notation) of the host to download or upload a relevant
file to the flash.
swFlashDLUser
OID 1.3.6.1.4.1.1588.2.1.1.1.1.14
Description The user name is used on the host for downloading or uploading a relevant file, to or
from the flash.
swFlashDLFile
OID 1.3.6.1.4.1.1588.2.1.1.1.1.15
Description The name of the file to be downloaded or uploaded.