Technical data

5-18 Fabric OS MIB Reference Manual
Publication Number: 53-0000521-08
System Group
5
swTelnetShellAdmStatus
Note Applicable to Brocade Fabric OS v2.x and v3.x only.
OID 1.3.6.1.4.1.1588.2.1.1.1.1.9
Description The desired administrative status of the telnet shell. Possible values are:
unknown (0) The status of the current telnet shell task is unknown.
terminated (1) The current telnet shell task is deleted.
Note v2.x, v3.x: By setting it to 1 (terminated), the current telnet shell task is deleted.
When this variable instance is read, it reports the value last set through SNMP.
v4.x: Not Supported.
swSsn
OID 1.3.6.1.4.1.1588.2.1.1.1.1.10
Description The soft serial number of the switch.
Note By default, the return value is the WWN of the switch.
Flash Administration
The next six objects are related to firmware or configuration file management. The underlying method
in the transfer of the firmware or configuration file is based on either FTP or remote shell. If a password
is provided, then FTP is used. If no password is provided, then remote shell is used.
Use one of the two following methods to manage the firmware or switch configuration file in the switch
flash.
Method 1
Set swFlashDLHost.0, swFlashDLUser.0, and swFlashDLFile.0 to appropriate host IP address in dot
notation (for example, 192.168.1.7), user name (for example, administrator), and file name of the
firmware or configuration file (for example, /home/fcswh/v4.4), respectively.
Method 2
1. Set swFlashDLPassword.0 to an appropriate value (for example, secret) if FTP is the desired
method of transfer.
2. Set swFlashDLAdmStatus.0 to 3 (swCfUpload) or 4 (swCfDownload), accordingly.
swFlashDLOperStatus
OID 1.3.6.1.4.1.1588.2.1.1.1.1.11
Description The operational status of the flash. Possible values are:
unknown (0)
swCurrent (1) - The flash contains the current firmware image or configuration file.