Technical data

BCSM IN A NUTSHELL 2008
© 2008 Brocade Communications Systems, Incorporated.
Page 39 of 44
ACCESS GATEWAY PORT MAPPING
A Brocade Access Gateway uses a port map to direct traffic from host HBAs to the N_Ports that connect to
the fabric
• The port map and N_Port configuration can be edited
Enabling Access Gateway on a Brocade 200E sets a default port map
• N_Ports: Ports 12, 13, 14, 15
• Three F_Ports mapped to each N_Port
Figure 9: Access Gateway Default Port Map