Technical data

Fabric OS FCIP Administrator’s Guide 41
53-1002474-01
Configuration steps
2
Remote FC WWN Short Option: -n
Long Option: --remote-wwn
<remote-WWN>
Yes This is a fabric security feature that allows
you to only allow the FCIP tunnel to come
up when the correct remote WWN is
entered. If the WWN of the remote side
does not match the value entered here,
the FCIP tunnel will not initiate.
Enable IPSec Short Option: -i
Long Option: --ipsec
Operands (modify only): 0|1
• Create behavior:
Operands are not
required. IPsec enabled
when specified on
create.
• Modify behavior:
Requires operands.
Yes Disables (0) or enables (1) IPsec on this
FCIP tunnel. Refer to“IPsec
implementation over FCIP tunnels” on
page 28 for information about IPsec
policies.
Legacy IPsec connection Short Option: -l
Long Option: --legacy
Operands (modify only): 0|1
• Create behavior:
Operands are not
required. Legacy IPsec
enabled when specified
on create.
• Modify behavior:
Requires operands.
Yes Disables (0) or enables (1) legacy IPsec
mode. This mode uses the IPsec
connection process compatible with Fabric
OS versions prior to v7.0.0.
IKE V2 authentication
Key for IPsec
Short Option: -K
Long Option: --key
Operands (modify and
create): <key>
Yes The pre-shared key used during IKE
authentication.
FICON mode Short Option: -F
Long Option: --ficon
Operands (modify only): 0|1
• Create behavior:
Operands are not
required. FICON mode
enabled when specified
on create.
• Modify behavior:
Requires operands.
Yes Disables (0) or enables (1) FICON mode.
TABLE 7 Tunnel options (Continued)
Option Arguments Disruptive Description