User Guide
Bluetooth Speaker Operation for
SPKACC Speaker Accessory Kit
Update: 10.23.2014
Page 1 of 2
BLUETOOTH® wireless technology SPEAKER OPERATION
To connect to the Broan-NuTone Bluetooth® wireless technology Speaker for the first time:
1. To play your personal music or audio files, you need a Bluetooth wireless technology enabled Smart Phone, Tablet,
or any other such device.
2. Set your device to a low-to-midrange volume before connecting to the speaker.
3. Make sure Fan is ON and Bluetooth wireless technology enabled device is located within 10 meters (approximately
33 feet) of the Speaker/Fan.
4. Pairing your Bluetooth® wireless technology enabled device with the Speaker:
a. For iPad/iPhone/iPod touch:
i. From your iPad/iPhone/iPod touch home page, tap Settings.
ii. From Settings, tap General (if you have iOS 7 or greater, you can skip this step).
iii. From General, tap Bluetooth.
iv. Move the Bluetooth Slider to ON/green (if it isn’t ON already). When you do this, a list of discoverable
Bluetooth® wireless technology devices will appear.
v. The Broan-NuTone Speaker has the Bluetooth® identifier “Sensonic™ Vent Fan”. This identifier should be
in the list of Discoverable Devices. If not, turn the Fan OFF, then ON, then turn Bluetooth OFF, then ON.
If “Sensonic™ Vent Fan” is still not on the list, consult with the owner’s manual for your device and
follow the procedure for Pairing/Connecting a Bluetooth® wireless technology device.
vi. Tap on “Sensonic™ Vent Fan” to complete the pairing of the Bluetooth® wireless technology Speaker with
your Apple device.
b. For Android Phone/Tablet:
i. From your smart phone/tablet home page, tap Settings.
ii. From the Settings menu, go to Wireless & Controls, Wireless & Networks, or something similar.
iii. Find Bluetooth, Bluetooth Settings or something similar and tap Bluetooth or move Bluetooth Slider to
ON (if it isn’t on already).
iv. On the Bluetooth screen, tap “Scan for Devices”, “Search for Devices” or something similar.
v. The Broan-NuTone Speaker has the Bluetooth® identifier “Sensonic™ Vent Fan”. This identifier should
show up in the list of Available Devices. If not, turn Fan OFF, then ON, and repeat pairing procedure.
If “Sensonic™ Vent Fan” is still not on the list, consult with the owner’s manual for your Android
device and follow the procedure for Pairing/Connecting a Bluetooth device.
vi. Tap on “Sensonic™ Vent Fan” to complete the pairing of the Bluetooth wireless technology Speaker with
your Android device.
c. For all other Bluetooth® wireless technology enabled devices:
i. Follow the instructions that came with your Bluetooth® wireless technology enabled Phone, Tablet or Pad
device to set it to search for Bluetooth® wireless technology accessories.
ii. Most Bluetooth® wireless technology enabled devices will require you to go to the “Paired Devices” (or
similar) screen and SELECT “Search for Devices” or something similar.
iii. The Broan-NuTone Speaker has the Bluetooth® identifier “Sensonic™ Vent Fan”. This identifier should
show up in the list of Available Devices, Discoverable Devices or similar. If not, turn Fan OFF, then ON, and
repeat pairing procedure.
5. Open up the audio program on your device and play your music or other audio files. The audio file should play over
the Bluetooth Fan Speakers.
6. When done playing/listening to your audio files, disconnect from the Speaker by either turning OFF the fan,
disconnecting Bluetooth® wireless technology from your device (Smart Phone, Tablet, etc) or simply walking away.
The Bluetooth® wireless technology will automatically disconnect when the device is out of range of the Speaker,
which should occur when device is approximately 10 meters (33 feet) away from the Speaker.