Specification Sheet

SPECIFICATION SHEET
REFERENCE QTY. REMARKS Project
Location
Architect
Engineer
Contractor
Submitted by Date
61B 99043329D
Especially designed to protect the exterior base
of a custom hood.
FEATURES
•
Cabinet mount
_
custom application
•
Stainless Steel Finish
•
Adjustable depth to fit into cabinet openings as shown on
chart (front to back)
•
Fit custom hood nominal widths: 30’’, 36’’ or 48’’ (30” only
for RML5230S)
•
Wipes clean easily
TO ORDER
RML5230S, RML7030S,
RML7036S, RML7048S,
RML7030L, RML7036L
AND RML7048L LINERS
Refer to table below to find the right liner part number for
your insert and for width of the custom hood.
HA0028
*
Dimension does not include 3/8’’ wide flange.
DIMENSIONS
Liner Model Insert Model Custom Hood Adjustable Depth
*
Width A
*
Cut-out Width B
Nominal Width Fits into cabinet openings of
Without Backboard With Backboard
RML5230S PM500SS 30” 17-1/2” to 20-1/2” 17-1/8” to 20-1/8” 28-3/8” 19-9/16”
RML7030S RMP1 or RMPE 30” 17-1/2” to 20-1/2” 17-1/8” to 20-1/8” 28-3/8” 26-11/16”
RML7036S RMP1 or RMPE 36” 17-1/2” to 20-1/2” 17-1/8” to 20-1/8” 34-3/8” 26-11/16”
RML7048S RMP1 or RMPE 48” 17-1/2” to 20-1/2” 17-1/8” to 20-1/8” 46-3/8” 26-11/16”
RML7030L RMP1 or RMPE 30” 20-1/2” to 23-1/2” 20-1/8” to 23-1/8” 28-3/8” 26-11/16”
RML7036L RMP1 or RMPE 36” 20-1/2” to 23-1/2” 20-1/8” to 23-1/8” 34-3/8” 26-11/16”
RML7048L RMP1 or RMPE 48” 20-1/2” to 23-1/2” 20-1/8” to 23-1/8” 46-3/8” 26-11/16”
10-5/16”
B
A*
Adjustable Depth*
See Chart
4”
2” (“S” Models)
3-1/2” (“L” Models)
The INSIDE DEPTH shown in the table above assumes a minimum cabinet backboard thickness of 3/8”.
Broan-NuTone LLC Hartford, Wisconsin www.broan.com 800-558-1711
Broan-NuTone Canada ULC Mississauga, Ontario www.broan.ca 888-882-7626