Spec Sheet

REFERENCE QTY. REMARKS Project
Location
Architect
Engineer
Contractor
Submitted by Date
Broan-NuTone LLC, 926 West State Street, Hartford, WI 53027 (1-800-637-1453)
Broan-NuTone Canada Inc., 1140 Tristar Drive, Mississauga, Ontario, Canada L5T 1H9 (1-888-882-7626)
*PRODUCT SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE
SPECIFICATION SHEET
MODELS L900 & L1500
LOSONE SELECT
®
CEILING MOUNT VENTILATORS
Incredibly reliable. Unbelievably quiet. Offering the CFM
choices you need at the lowest sound levels in the industry.
FEATURES
GRILLE:
Conceals interior
Low profile styling blends with any decor
Metal, finished with white painted enamel
BLOWER:
Low RPM for quiet operation
Resilient anti-vibration mounts
Dynamically-balanced, polymeric, centrifugal blower
wheel for quiet, efficient performance
Permanently lubricated, thermally protected motor
Plug-in motor rated at 120 VAC
Designed for continuous operation
HOUSING:
Rugged, 20 gauge galvanized steel
1/2” (12.7 mm) acoustic insulation inside
May be installed in ceiling or wall (size permitting)
8-position mounting brackets for easy installation
and greater adaptability to various mounting
requirements
Automatic back draft damper located within duct
connector
Factory-shipped in horizontal discharge position for
8” x 12” (203.2 mm x 304.8 mm) ductwork
May be converted to vertical discharge
May be installed as an in-line ventilator with addition of
accessory kit Model 983L (purchase separately)
TYPICAL SPECIFICATION
Ventilator shall be Broan Model L900 or (L1500).
Ventilator shall have galvanized steel housing insulated
with at least 1/2” (12.7 mm) of acoustic insulation. Housing
to have adjustable mounting brackets.
Automatic back draft damper to be located within duct
connector. Duct connector, blower assembly and wiring
plate shall be adjustable for either horizontal or vertical
installation.
Blower unit shall be removable from housing and will have
a polymeric, centrifugal-type blower wheel. Motor to be
permanently lubricated and mounted with resilient anti-
vibration mounts. RPM not to exceed number listed for each
model.
Air delivery shall be no less and sound levels no greater than
listed for each model. All air and sound ratings shall be
certified by AMCA. Units to be UL and cUL listed.
“Broan-NuTone LLC certifies that
the models shown herein are licensed
to bear the AMCA Seal. The ratings
shown are based on tests and
procedures performed in accordance
with AMCA Publication 211 (and
AMCA Publication 311 if sound is
also certified) and comply with the
requirements of the AMCA Certified
Ratings Program”
L900d041122

Summary of content (2 pages)