Technical Specifications

SPECIFICATION SHEET
Broan Hartford, Wisconsin www.broan.com 800-558-1711
REFERENCE QTY. REMARKS Project
Location
Architect
Engineer
Contractor
Submitted by Date
FEATURES
GRILLE:
Matte white polymeric - blends well with any decor
Sturdy light-diffusing lens accepts up to 100W incandescent
lamp. Bulb not included.
BLOWER:
Plug-in, permanently lubricated, totally enclosed motor
Centrifugal blower wheel for quiet, efficient performance
Long life motor bearings
Designed for continuous operation
HOUSING:
Rugged, 26-gage galvanized steel construction
Integral key-holed mounting brackets for easy, secure instal-
lation directly to joist
Provision for wire suspension when installed in a drop ceiling
Tapered, polymeric duct fitting with built-in backdraft damper
for easy, positive duct connection and no metallic clatter
NOTE: For installation in ceilings up to 12/12 pitch
U.L. Listed for use in insulated ceilings (Type I.C.)
U.L. Listed for use over bathtubs and showers when con-
nected to a GFCI protected branch circuit
Use supply wiring rated for at least 90°C
Quiet heavy duty ventilators built with high per-
formance blowers.
MODEL HD80L
TYPICAL SPECIFICATION
Fan/Light unit shall be Broan Model HD80L.
Unit shall have galvanized steel housing with integral mount-
ing brackets. Unit shall have built-in backdraft damper and
shall be ducted to a roof or wall cap.
Motor to be totally enclosed, permanently lubricated, and
have long-life bearings designed for continuous operation.
Blower assembly shall have a centrifugal blower wheel and
be removable from housing.
Air delivery shall be no less and sound level no greater than
valves listed in the "Performance Ratings" charts on this
sheet. All air and sound ratings shall be certified by HVI &
AMCA licensed.
Unit shall be U.L. Listed for use over bathtubs and showers
when connected to GFCI protected branch circuit.
Unit shall be U.L. Listed for use in insulated ceilings (Type I.C.).
71C 99042918F
Broan-NuTone LLC certifies that the models shown
herein are licensed to bear the AMCA Seal. The ratings
shown are based on tests and procedures performed
in accordance with AMCA Publication 211 and AMCA
Publication 311 and comply with the requirements of the
AMCA Certified Ratings Program.
HEAVY DUTY
FAN/LIGHT