Spec Sheet

ManualsBrandsBroan ManualsBroan Whole House VentilationBroan 105 CFM Energy Recovery Ventilator with Side Ports

BROAN™ ERVS100

Part no. ERVS100S

65-105 CFM (0.4 in. w.g.)

VB0248

THE FRESH AIR SOLUTION FOR SOUTHERN REGIONS

The Broan ERVS100 is an effective, balanced ventilation solution

designed specifically for homes in southern regions. The ERVS100

provides a continuous supply of fresh air to the home while exhausting

stale air and polluants. Plus it manages excess moisture – making it a

centerpiece for tightly-constructed, energy efficient homes in hot and

humid or dry climates.

• 65 to 105 CFM at 0.4 in. w.g;

• Energy recovery core recovering up to 51% of the excess moisture

and up to 71% of the apparent heat or coolness;

• Built-in humidity sensor limiting the ventilation during periods

of excessive outdoor humidity levels contributes to maintain a

comfortable living area and mitigate the risks of mold growth;

• Exclusive bracket system providing a faster and easier installation in

the ceiling, an attic or in a closet. See the Installation and User guide

for more details;

• Integrates with existing forced-air furnace ducting for easy

installation but runs independently to limit energy consumption

related to ventilation;

• Built-in damper on fresh air supply port to prevent outdoor air

in ltration when the unit is turned o ;

• Integrated control to easily set the unit at installation.

REPAIRS AND MAINTENANCE

All parts requiring maintenance can be removed in less than 5 minutes

allowing easy access for repairs. The PSC motors are permanently

lubricated.

WARRANTY

The BROAN™ ERVS100 is protected by a 5-year warranty on parts only.

The energy recovery core is covered by a 5-year warranty, with the

original proof of purchase.

Product balancing

The ERVS100 is equipped with 2 high static pressure blowers and is

factory balanced. Once installed, the ERVS100 will remain balanced

(within a 10% total di erence between the exhaust and supply

air ows) when the static pressure di erence between the exhaust

and the supply remains below 0.2 in. w.g.

No balancing dampers are required when this condition is met.

Filters

- 2 washable  lters, 20 PPI

- MERV 8 optional  lters, part V21030.

Defrosting system

Unit performs a negative defrost during 10 minutes every 20 minutes

when outdoor temperature is below 14°F, and 10 minutes every

10 minutes below -4°F.

Energy Recovery Core

Material: Polymerized paper

Type: Cross  ow

Warranty: 5 years

Options

• Broan VTYIK1 Tandem transition

(requires an additional backdraft damper, not included)

• Broan VB20W 20-minute push-button control

• Broan 69V Single-Function Control, Ivory

(Dry contact standby switch)

• Broan 69W Single-Function Control, White

(Dry contact standby switch)

• Broan 634M black exhaust roof cap 6" with backdraft damper and

bird screen

• Broan 843BL black exhaust wall cap 6" with backdraft damper and

bird screen

• Broan 641 aluminum exhaust wall cap 6"

• Broan 641FA aluminum inlet wall cap 6" with bird screen

• Broan CVG6 interior inlet plastic grille 6"

• Broan CVL6 mounting sleeve for inlet grille CVG6

• Broan CVLD6 sleeve with 6" backdraft damper

Requirements and standards

• Complies with the UL 1812 requirements regulating the installation

of Energy Recovery Ventilators;

• HVI certi ed;

• Air ow and energy recovery performance tested in accordance with

CSA C439 standard.

Summary of content (6 pages)

PAGE 1
BROAN™ ERVS100 Product balancing Part no. ERVS100S The ERVS100 is equipped with 2 high static pressure blowers and is factory balanced. Once installed, the ERVS100 will remain balanced (within a 10% total difference between the exhaust and supply airflows) when the static pressure difference between the exhaust and the supply remains below 0.2 in. w.g. No balancing dampers are required when this condition is met. 65-105 CFM (0.4 in. w.g.
PAGE 2
Performance in hot and humid climate Supply air from outdoors 82°F @ 74% RH Exhaust from home 75°F @ 50% RH Exhaust to outdoors 79°F @ 63% RH Supply to home 78°F @ 67% RH VF0067 Performance in hot and dry climate Supply air from outdoors 106°F @ 30% RH Exhaust from home 75°F @ 50% RH Exhaust to outdoors 94°F @ 36% RH Supply to home 87°F @ 44% RH VF0067 Performance in winter season Supply air from outdoors 32°F @ 30% RH Exhaust from home 75°F @ 50% RH Exhaust to outdoors 45°F @ 36% RH Supply t
PAGE 3
Noise level 0.4 sone @ 105 cfm at grille with 5’ of flexible ducting (tested in accordance with ISO 5136 and HVI 915). Speciﬁcations Model : Broan ERVS100 Part number: ERVS100S Total assembled weight including packaging: 40 lb.
PAGE 4
Safe Installation Zone This unit is designed for installation where the outdoor temperature is above 14°F throughout the year (zone A on map below). For units installed in zone B, they must be installed in conditioned space or in the ceiling with a surrounding sealed enclosure, see section 3.3.1. HELENA OLYMPIA BISMARCK ST.
PAGE 5
Combining with an AHU Recommended configurations Option 1 - When the distribution of fresh air from the ERV is connected to the return of an AHU (such as in the image below, on the left), static pressure where the fresh air from the ERV enters the AHU return ducting must be below 0.15 in.w.g. to ensure proper functionning of the built-in fresh air damper. If return duct static pressure exceeds the 0.15 in.w.g.
PAGE 6
Mode and RH Adjustable Controls Location Remove the door to access the MODE and RH adjustable controls. VD0395 Relative humidity limit The ERVS100 monitors the outdoor air conditions (temperature and humidity level) every 10 minutes with a built-in sensor. When the outdoor conditions are above the set limits, the unit will limit the ventilation to 10 minutes per hour and come back to its previous setting when the conditions get back to the set limit.