Specifications

89 of 110
www.AceSupplyCo.com
One Easy Number: [phone]
The NEW Retro-Round Insertable Damper makes it
easy to install these dampers into any rigid metal
duct work. Just slit a 1" wide opening in the center of
the round duct, slide in the RRP and secure
with the screws provided. The Retro-Round is
available with two different motors. The RRP uses a
DC motor and wires using modular plug-in cords. The
RRM is a 24VAC version using standard thermostat
wire. Both motors have position indicating LEDs.
Model RRP - RetroRound Plug-In Damper uses a low
current DC motor and wires using a 25' modular cord,
included with each damper as well as a splitter to
connect additional RRP dampers to the same zone.
The RRP must be controlled by the MMP3, H3P or
MZP4 Panels. Up to 10 dampers can be used per
zone.
RRP
Retro Round Insertable / Plug-In Damper
Description:
174012 EA 1
RRP06 (6”) Retro-Round Z-A-T Insertable Damper DC Motor
ACE # PK UM DESCRIPTION