Specification Sheet

ERV180: PERFECT FOR NEW
RESIDENTIAL CONSTRUCTIONS
Contractors and builders need cost-effective, reliable and
code-compliant mechanical ventilation systems for new
home construction. The Broan ERV180 offers superior value at
an entry-level price. The ERV180 represents over 15 years of continuous
improvement to deliver contractors the durability and reliability they
have come to expect from Broan.
Key features:
• Removable crossow polymerized paper ERV core
• Maintenance free, totally enclosed, sealed bearings motor
• Pressure taps, balancing dampers and straps for insulated ducts for
quick, eective installation
• Can be installed upside down
• Compatible with the VT7W digital wall control
REPAIRS AND MAINTENANCE
Broan ERV180 modular design makes it possible to remove all mecha-
nical parts in less than 5 minutes. The low power consumption motor is
permanently lubricated. Finally, the electronic circuit board eliminates
electromechanical parts, reducing repair time to a minimum.
WARRANTY
The ERV180 is protected by a 5-year warranty on parts, including the
energy recovery core, with the original proof of purchase.
VB0234
Available at:
ENERGY RECOVERY VENTILATOR
Controls
• This unit is very simple to operate: press on its push button, located
on the electrical compartment, to activate it. Press once for low
speed, once again for high speed, and once more to stop it.
• For more convenience, this unit can also be controlled by an optional
main control. For a complete list of optional main and auxiliary
controls available, refer to the Wall Control Compatibility Chart
on last pages of wall controls specication sheet, available at
www.broan.com.
• For more details about controls, refer to the Main and auxiliary wall
controls user guide, also available at www.broan.com.
Options
• Complete line of registers and diusers
Defrosting System
The ERV180 uses an ecient defrosting method. No
negative pressure is created by air exhausted to the outside, as the air
is recirculated into the house, helping to prevent any backdraft.
Energy Recovery Core
Dimensions: 15.4" x 10.6" x 10.6" (39.1 cm x 26.9 cm x 26.9 cm)
Exchange surface: 107 ft. (9.94 m)
Weight: 14.2 lb. (6.44 kg)
Material: Polymerized paper
Type: Crossflow core
Warranty: 5 years
Requirements and Standards
• Complies with the UL 1812 requirements regulating the installation
of Energy Recovery Ventilators
• Complies with the CSA C22.2 no. 113 Standard applicable to ventilators
• Complies with CSA F326 requirements regulating the installation of
Energy Recovery Ventilators
• HVI certied
• Technical data was obtained from published results of tests relating
to CSA C439 Standards
VF0053
STALE AIR
FROM BUILDING
FILTERED AIR
TO BUILDING
OutdOOr temperature defrOst CyCle (in minutes)
°C °F Defrost / operation
Warmer than -5 Warmer than 23 no Defrost
-5 to -15 23 to 5 10 / 60
-15 to -27 5 to -17 10 / 30
-27 anD less -17 anD less 10 / 20
BROAN ERV180
Part no. ERV180S
80 to 183 CFM (0.4 in. w.g.)