Specification Sheet

A VERSATILE AND COMPACT PLATFORM OFFERING
EVEN MORE POWER
The ERV120 is providing 15 cfm more than the Constructo 1.0 ERV
making it suitable for larger ventilation needs. It’s the only 120-cfm
ERV qualifying for ENERGY STAR®, thanks to it’s unique ERV core
reducing the air conditioning and heating loads during summer and
winter respectively. Still, it offers the same ease of installation associated
to the Constructo 1.0 series.
Its operation can be interlocked with an existing furnace without
adding an extra relay. Also, for more convenience, its latches can be
relocated from sides to front (as shown on unit picture). This compact,
lightweight, and powerful unit is the ideal choice for small
single-family homes, high rise residential buildings and other limited
space applications.
• Versatile horizontal or vertical port configuration
• Removable terminal block to ease auxiliary wall control connections
• Integrated pressure taps, if balancing required by building code
• ENERGY STAR® qualified
REPAIRS AND MAINTENANCE
All parts of the ERV120 that could need maintenance can be removed
in less than 5 minutes, allowing direct access for easy repairs. The PSC
motors are permanently lubricated. Finally, the removable electrical
drawer with pull-out PCB assembly allows easy access for maintenance
of major sub-components.
WARRANTY
The ERV120 is protected by a 5-year warranty on parts only. The energy
recovery core is covered by a 5-year warranty, with the original proof
of purchase.
Available at:
ENERGY RECOVERY VENTILATOR
Controls
• This unit is very simple to operate. Once it is installed, press on its
push button, located on on the bottom of the unit, to activate it.
Press once for low speed, once again for high speed, and once more
to stop it.
• For more convenience, this unit can also be controlled by an optional
main control. For a complete list of optional main and auxiliary
controls available, refer to the Wall Control Compatibility Chart
on last pages of wall controls speci cation sheet, available at
www.broan.com.
• For more details about controls, refer to the Main and auxiliary wall
controls user guide, also available at www.broan.com.
Options
• Complete line of registers and di users
• Metal tandem hood (part no. 14695)
Homeshield™ Defrosting System
The ERV120 uses a unique defrosting method. No negative pressure is
created by air exhausted to the outdoors, as the air is recirculated into
the house, helping to prevent any backdraft.
Energy Recovery Core
Dimensions: 19 /” x 13 /” x 6 /” (48.6 cm x 34.1 cm x 17.3 cm)
Exchange surface: 56 ft. (5.2 m)
Weight: 9.25 lb. (4.2 kg)
Material: Polymerized paper
Type: Crossflow and counterflow core
Warranty: 5 years
Requirements and Standards
• Complies with the UL 1812 requirements regulating the installation
of Energy Recovery Ventilators
• Complies with the CSA C22.2 no. 113 Standard applicable to ventilators
• Complies with CSA C444 requirements regulating the installation of
Energy Recovery Ventilators
• Technical data was obtained from published results of tests relating
to CSA C439 Standards
• HVI certi ed and ENERGY STAR® quali ed
VF0037
STALE AIR
FROM
BUILDING
FILTERED
AIR TO
BUILDING
OUTDOOR
TEMPERATURE
DEFROST CYCLE
(IN MINUTES)
oC oF
D
EFROST/
OPERATION
WARMER
THAN -5
WARMER
THAN 23
NO DEFROST
-5 TO -27 23 TO -17 9/28
-27
AND LESS
-17
AND LESS
10/22
VB0238
This product earned the ENERGY STAR® by meeting strict energy e ciency guidelines set by Natural Resources Canada and the US EPA. It meets ENERGY STAR requirements only
when used in Canada.
BROAN ERV120
Part no. ERV120T (TOP PORTS)
Part no. ERV120S (SIDE PORTS)
64 to 120 CFM (0.4 in. w.g.)