Specification Sheet
AN INGENIOUS AIR EXCHANGE SOLUTION THAT’S
AS VERSATILE AS IT IS COMPACT!
Configured with factory built vertical or horizontal ports, the
Broan ERV110 is the most versatile 100-cfm unit available on the
market today. Among its exclusive features, this unit is equipped
with integrated balancing and backdraft dampers in its exhaust to
outside and fresh air supply ports.
Its operation can be interlocked with an existing furnace without
adding an extra relay. Also, for more convenience, its latches can
be relocated on its front (as shown on unit picture). This compact,
lightweight and powerful unit is the ideal choice for small single-family
homes, high rise residential building and other limited space applications.
• Versatile horizontal or vertical port configuration
• Removable terminal block to ease auxiliary wall control connections
• Integrated pressure taps, if balancing required by building code
• Twin high-pressure blowers
• ENERGY STAR® qualified
REPAIRS AND MAINTENANCE
All parts of the Broan ERV110 that could need maintenance can
be removed in less than 5 minutes, allowing direct access for easy
repairs. The PSC motors are permanently lubricated. Finally, the
removable electrical drawer with pull-out PCB assembly allows easy
access for maintenance of major sub-components.
WARRANTY
The Broan ERV110 is protected by a 5-year warranty on parts only. The
energy recovery core is covered by a 5-year warranty, with the original
proof of purchase.
VB0238
Available at:
ENERGY RECOVERY VENTILATOR
Controls
• This unit is very simple to operate. Once it is installed, press on its
push button, located on on the bottom of the unit, to activate it.
Press once for low speed, once again for high speed, and once more
to stop it.
• For more convenience, this unit can also be controlled by an optional
main control. For a complete list of optional main and auxiliary
controls available, refer to the Wall Control Compatibility Chart
on last pages of wall controls speci cation sheet, available at
www.broan.com
• For more details about controls, refer to the Main and auxiliary wall
controls user guide, also available at www.broan.com
Options
• Complete line of registers and di users
• Dual exterior hood kit (including the Tandem® transition),
part no. TYIK1
Homeshield™ Defrosting System
The Broan ERV110 uses a unique defrosting method. No
negative pressure is created by air exhausted to the outside, as the air
is recirculated into the house, helping to prevent any backdraft.
Energy Recovery Core
Dimensions: 19/” x 13/” x 6 /” (48,6 cm x 34,1 cm x 17,3 cm)
Exchange surface: 56 ft. (5.2 m)
Weight: 9.25 lb. (4,2 kg)
Material: Polymerized paper
Type: Crossflow and counterflow core
Warranty: 5 years
Requirements and Standards
• Complies with the UL 1812 requirements regulating the installation
of Energy Recovery Ventilators
• Complies with the CSA C22.2 no. 113 Standard applicable to ventilators
• Complies with CSA C444 requirements regulating the installation of
Energy Recovery Ventilators
• Technical data was obtained from published results of tests relating
to CSA C439 Standards
• HVI certi ed and ENERGY STAR® quali ed
VF0037
STALE AIR
FROM
BUILDING
FILTERED
AIR TO
BUILDING
OUTSIDE
TEMPERATURE
DEFROST CYCLE
(IN MINUTES)
oC oF
DEFROST/
OPERATION
WARMER
THAN -5
WARMER
THAN 23
NO DEFROST
-5 TO -27 23 TO -17 9/28
-27
AND LESS
-17
AND LESS
10/22
This product earned the ENERGY STAR® by meeting strict energy e ciency guidelines set by Natural Resources Canada and the US EPA. It meets ENERGY STAR requirements only
when used in Canada.
BROAN ERV110
Part no. ERV110T (TOP PORTS)
Part no. ERV110S (SIDE PORTS)
45 to 105 CFM (0.4 in. w.g.)