Spec Sheet

ManualsBrandsBroan ManualsBroan Whole House VentilationBroan 100 CFM Energy Recovery Ventilator with Side Ports and Energy Star Qualified

ENERGY RECOVERY VENTILATOR

CONSTRUCTION

• 22 ga. galvanized steel housing

• 22 ga. pre-painted steel door

• One-piece molded insulation shell,

(expanded polystyrene; UL 94 HF-1 certi ed)

• Galvanized steel 5" diameter ports*

• Steel door hinges and latches

• Cold side ports with plastic ring; allow vapor barrier sealing

• No drain required

• Included installation brackets

*All units ports were created to be connected to ducts having a

minimum of 5” diameter, but if need be, they can be connected to

bigger sized ducts by using an appropriate transition (e.g.: 5” diameter

to 6” diameter transition).

MOTORS

• Two high reliability, external rotor PSC motors, totally enclosed and

thermally protected

• Backward blowers, can support high static pressure environment

FILTERS

• Two washable 20 ppi reticulated polyester urethane foam  lters,

UL 900 class 2 certi ed

• Optional MERV 8  lter kit, part no. V21030 (additional 0.1 in. w.g.

static pressure to be considered) (sold separately)

ERV CORE

• Cross ow aluminum-polymerized paper core, UL723 certi ed

• Hydroscopic polymer exchange water by direct vapor transfer using

molecular transport without the need of condensation

• Constructed of alternate layers of corrugated aluminum material

and polymeric bactericide dessiccant impregnated media; will not

promote growth of mold or bacteria

• Unique rectangular  ute design to provide very low pressure drop

values

Controls

• The ERV100SP unit must be controlled by a main wall control (not

included). For a complete list of optional main and auxiliary controls

available, refer to the Wall Control Compatibility Chart on last pages

of wall controls speci cation sheet, available at www.broan.com.

• For more details about controls, refer to the Main and auxiliary wall

controls user guide, also available at www.broan.com.

• Removable terminal block included for quicker low voltage control

connections

• LED indicator shows error codes

• Unit must be permanently energized, no control should be installed

on power supply of unit

Air Flow

• Pressure taps and balancing chart to allow easier balancing of the

unit

• Integrated balancing dampers in cold supply and cold exhaust ports

• Integrated motorized damper adjacent to the cold supply port

• Integrated backdraft damper in cold exhaust port

Defrosting System

• Equipped with Homeshield™ defrosting system: recirculation defrost

cycle to maintain balanced air pressure in the dwelling unit

• A switch on ERV unit allows 3 quick-access defrost modes, a LED

shows which defrost mode has been chosen:

- Standard (factory set regular mode)

- Plus (extended defrost for colder areas)

- Discretion (keeps the same speed when performing defrost as

performing ventilation)

Requirements and standards

• HVI certi ed

• ENERGY STAR® quali ed

• Complies with the UL 1812 requirements regulating the installation

of Energy Recovery Ventilators

• Complies with the CSA C22.2 no. 113 Standard applicable to ventilators

• Complies with CSA F326 requirements

regulating the installation

of Energy Recovery Ventilators

DEFROST CYCLES

OUTDOOR TEMPERATURE*DEFROST IN MINUTES / AIR EXCHANGE IN MINUTES

°C °F STANDARD PLUS DISCRETION

WARMER THAN -10 WARMER THAN 14 NO DEFROST NO DEFROST NO DEFROST

FROM

-10 TO -15 FROM 14 TO 5 8/50 10/30 16/50

FROM -15 TO -27 FROM 5 TO -17 8/25 10/20 16/25

-27 AND LESS -17 AND LESS 10/22 10/15 20/22

Warranty

The Broan ERV100 PLUS is protected by a 5-year warranty on parts

only, with the original proof of purchase.

* Outdoor temperature is read by a thermistor located inside the unit,

next to fresh air from outdoor port.

VB0265

This product earned the ENERGY STAR® by meeting strict energy e ciency guidelines set by Natural Resources Canada and the US EPA. It meets ENERGY STAR

requirements only when used in Canada.

BROAN ERV100 PLUS

Part no. ERV100SP

Low speed: 50 CFM (0.2 in. w.g.), selectable 65 CFM

High speed: 100 CFM (0.4 in. w.g.), selectable 85 CFM

Summary of content (4 pages)

PAGE 1
ENERGY RECOVERY VENTILATOR BROAN ERV100 PLUS Part no. ERV100SP Low speed: 50 CFM (0.2 in. w.g.), selectable 65 CFM High speed: 100 CFM (0.4 in. w.g.), selectable 85 CFM Controls • The ERV100SP unit must be controlled by a main wall control (not included). For a complete list of optional main and auxiliary controls available, refer to the Wall Control Compatibility Chart on last pages of wall controls specification sheet, available at www.broan.com.
PAGE 2
BROAN ERV100 PLUS   Exhaust air to outdoor Fresh air to building TOP VIEW Fresh air from outdoor  Exhaust air from building  20”  23 1/8”   27 1/8” 9”  6 ¼” 22” 18¼” Balancing dampers, backdraft dampers 22 ga. steel door Removable terminal block to ease wall control connection. Use 4-wire, 22 AWG cable (purchase separately). Integrated pressure taps for balancing Ø VK0087A 5” TYP. 120 volts, 0.8 A 3 ft.
PAGE 3
Simplified Installation (connection to a forced air system) Supply-return Return-return A + B = not less than 10 ft. (3.1 m) OR A Minimum 18 in. (0.5 m) A ft. um 3 (0.9 m) B m Mini VJ0115 B The furnace blower operation must be synchronized with the ERV blower operation. VJ0114 A + B = not less than 10 ft. (3.1 m) EXTERNAL STATIC PRESSURE (IN. W.G.) VENTILATION PERFORMANCE 1.0 0.9 0.8 0.7 0.6 0.5 0.4 0.3 0.2 0.
PAGE 4
BROAN ERV100 PLUS ARCHITECTURAL SPECIFICATIONS AIRFLOW Controls • High static pressure backward blowers shall perform a minimum of 68 CFM @ 1.0 in. w.g.