ADA Compliant Statement
FROM
HOOD
2-ROCKER
SWITCH
WHITE
BLACK
RED
GROUND
‡
** INTERMEDIATE 
HOODS
4B. When using a 2-Rocker Switch to turn a range hood 
ON & OFF from another location with 120 VAC 
POWER CABLE ENTERING SWITCH BOX:
  Remove the range hood’s wiring cover. If the hood 
has a BLACK JUMPER WIRE, it must be cut and 
the end stripped as shown. (FIG. I)
  Use UL approved clamps to secure all cables to 
hood and box. Make wiring connections following 
appropriate diagram. Use proper wire nut sizes for 
number and size of wires. Replace range hood wir-
ing cover.
4C. When using a 2-Rocker Switch to turn a range hood 
ON & OFF from another location with 120 VAC 
POWER CABLE ENTERING HOOD:
  Remove the range hood’s wiring cover. If the hood 
has a BLACK JUMPER WIRE, it must be cut and 
the end stripped as shown. (FIG. I) 
  Use UL approved clamps to secure all cables to 
hood and box. Make wiring connections following 
appropriate diagram. Use proper wire nut sizes for 
number and size of wires. Replace range hood wir-
ing cover.
5. MOUNT CONTROL IN SWITCH BOX
  Tuck wires into switch box and fasten the control to 
  box using attached screws.
6.  ATTACH SWITCH PLATE
  Fasten the switch plate to the control using the short 
  screws from the parts bag.
*  2-SPEED RANGE HOODS:
  Broan 40000, F40000, 41000, 42000, 43000, 52000, 
PM250, CBD1, QL1, QML, QS1 & QSE1 Series. NuTone 
NS6500, NSPM250, RL6200 & WS1 Series.
**  INTERMEDIATE RANGE HOODS:
  Broan 46000 & QT20000 Series. NuTone ACS3 Series.
BROAN-NUTONE ONE YEAR LIMITED WARRANTY
Broan-NuTone warrants to the original consumer purchaser of its products that 
such products will be free from defects in materials or workmanship for a period of 
one year from the date of original purchase. THERE ARE NO OTHER WARRANTIES, 
EXPRESS OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, IMPLIED WARRANTIES OF 
MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE.
During this one-year period, Broan-NuTone will, at its option, repair or replace, without 
charge, any product or part which is found to be defective under normal use and service.
THIS WARRANTY DOES NOT EXTEND TO FLUORESCENT LAMP STARTERS, TUBES, 
HALOGEN AND INCANDESCENT BULBS, FUSES, FILTERS, DUCTS, ROOF CAPS, WALL 
CAPS AND OTHER ACCESSORIES FOR DUCTING. This warranty does not cover (a) normal 
maintenance and service or (b) any products or parts which have been subject to misuse, 
negligence, accident, improper maintenance or repair (other than by Broan-NuTone), faulty 
installation or installation contrary to recommended installation instructions.
The duration of any implied warranty is limited to the one-year period as specified for the 
express warranty. Some states do not allow limitation on how long an implied warranty 
lasts, so the above limitation may not apply to you.
BROAN-NUTONE’S OBLIGATION TO REPAIR OR REPLACE, AT BROAN-NUTONE’S 
OPTION, SHALL BE THE PURCHASER’S SOLE AND EXCLUSIVE REMEDY UNDER THIS 
WARRANTY. BROAN-NUTONE SHALL NOT BE LIABLE FOR INCIDENTAL, CONSEQUENTIAL 
OR SPECIAL DAMAGES ARISING OUT OF OR IN CONNECTION WITH PRODUCT USE OR 
PERFORMANCE. Some states do not allow the exclusion or limitation of incidental or 
consequential damages, so the above limitation or exclusion may not apply to you.
This warranty gives you specific legal rights, and you may also have other rights, which 
vary from state to state. This warranty supersedes all prior warranties.
To qualify for warranty service, you must (a) notify Broan-NuTone at the address or 
telephone number below, (b) give the model number and part identification and (c) 
describe the nature of any defect in the product or part. At the time of requesting warranty 
service, you must present evidence of the original purchase date.
Broan-NuTone LLC, 926 W. State Street, Hartford, Wisconsin 53027 
www.broan.com 800-558-1711
FIG. I
* 2- SPEED
HOODS
** INTERMEDIATE 
HOODS
CUT BLACK 
JUMPER WIRE 
HERE!
CUT BLACK 
JUMPER 
WIRE HERE!
STEP 4B
POWER INTO SWITCH
STEP 4C
POWER INTO HOOD
‡
 CODE REQUIRES BOTH 
ENDS OF THIS WIRE'S 
INSULATION TO BE COL-
ORED. USE A PERMA-
NENT MARKER.
* 2- SPEED
HOODS
RED
BLACK
BLUE
RED
WHITE
BLUE
RED
99043739D
PK92824-10-00-0E
FROM SWITCH 
BOX
REF. FIG 1
WHITE
BLUE
BLACK
BLACK
GRN
** INTERMEDIATE 
HOODS
REF. FIG 1
BLUE
BLACK
REF. FIG 1
* 2- SPEED
HOODS
BLACK
GROUND
120 VAC
LINE IN
TO SWITCH 
BOX
BLACK
WHITE
‡
GROUND
120 VAC
LINE IN
TO SWITCH 
BOX
WHITE
BLACK
BLACK
BLACK
REF. FIG 1
GRN
RED
BLACK
WHITE
FROM SWITCH 
BOX
WHITE
‡
2-ROCKER
SWITCH
RED
BLACK
BLACK
GROUND
WHITE
WHITE
120 VAC
LINE IN
TO
HOOD



