Spec Sheet

www.broan.com B6LCd190528
Broan-NuTone LLC, 926 West State Street, Hartford, WI 53027 (1-877-862-7626)
Project: REMARKS
Location:
Model no.: B6LC
Quantity:
Submitted by: Date:
NOTE: All specications are subject to change without notice.
effectivenessenergy Performance
pOlyprOpylene cOre EffEctivEnEss
supply
temperature
nEt
Air flow
sensible latent tOtal
°F °C cfm l/s % % %
heating
35 1.7 400 189 57 0 38
35 1.7 300 142 63 0 42
Cooling
95 35 400 189 55 0 21
95 35 300 142 60 0 23
aluminum cOre EffEctivEnEss
supply
temperature
nEt
Air flow
sensible latent tOtal
°F °C cfm l/s % % %
heating
35 1.7 400 189 54 0 36
35 1.7 300 142 57 0 38
Cooling
95 35 400 189 52 0 20
95 35 300 142 56 0 21
pOlymerized paper cOre (Hm) EffEctivEnEss
supply
temperature
nEt
Air flow
sensible latent tOtal
°F °C cfm l/s % % %
heating
35 1.7 400 189 60 47 56
35 1.7 300 142 65 53 61
Cooling
95 35 400 189 60 38 46
95 35 300 142 63 45 52
Unit PErformAncE, sEnsiblE EffEctivEnEss
HEAting sUPPly tEmPErAtUrE
35°F / 1.7°C
Airflow (cfm)
300 400 500 600
PolyProPylene 69 64 59 55
aluminum 62 59 56 55
Polymerized PaPer (hm) 77 75 73 71
Unit PErformAncE, totAl EffEctivEnEss
cooling sUPPly tEmPErAtUrE
95°F / 35°C
Airflow (cfm)
300 400 500 600
Polymerized PaPer (hm) 49 44 41 39
accoustic noise PoWer chart (dBa) at unit Ports
The data shown on left chart come from measurement performed according
to ISO 5136 Standard. These data represent the sound power directly
measured at the fresh air distribution port and exhaust air from building
port. To get the actual noise level in the room, consider noise attenuation
resulting from total ductwork installation.
Airow
Fresh air
to building port
Exhaust air
from building port
685 CFM at 0.4 in. w.g. 76.9 dBA 61.3 dBA
586 CFM at 0.2 in. w.g. 66.1 dBA 52.5 dBA
sPecifications
• Model: B6LC • Filters: 4 reticulated washable foam • Supply & Exhaust Blower motors: • Fan Speed control:
lters (20 ppi) and - Motor type: PSC motors with sealed - Low, medium & high speed
• All duct connections: 8” x 14” 2 disposable MERV 8 lters sleeved bearings, - 2 speeds available to user
• Housing: 20 ga. pre-painted steel (optional) part no. SV63342 3 speeds (2 available to customer) - Low or medium speed is selected
• Mounting: Reinforced rubber straps - R.P.M.: 1625 - H.P.: 1/4 at the time of installation
• Drains: 3⁄4” ttings - Fan type: Direct drive centrifugal • Unit electrical characteristics:
• Insulation: 3⁄4” foil faced and blower 7 ⁄” x 6” Volts MCA MOP Watts
1” acoustic berglass wool - Housing: Galvanised steel 120 9.5 12.0 640