Specification Sheet

HEAT RECOVERY VENTILATOR
LIGHT COMMERCIAL UNIT FOR POOL AND OTHER
EXTREMELY HUMID LOCATIONS.
The B1600705 is a multi-purpose Heat Recovery Ventilator designed for
the ventilation requirements of residential, commercial and industrial
applications. Utilizing a single element cross-flow core, the B1600705 is
capable of airflows up to 700 cfm (330 l/s) at standard air pressure. Heat
recovery can be matched to the applcation with up to 78% apparent
sensible recovery..
• Two metal channels are permanently attached to the bottom of the
case to permit easy installation
• High eciency, direct drive, centrifugal blowers
• Energy ecient 2-speed PSC motors with sealed ball bearings
• Available with FrostBuster™ defrost system
• Low voltage control circuit for connection of dehumidistat, switches
or timers
APPLICATIONS INCLUDE:
• Swimming Pools • Silk Screening Shop
• Night Clubs • Veterinary Clinics
• Fitness Centers • Large Residential Homes
• Town Halls • Art Studios
• Commercial Oce Spaces • Heath Spas
• Many other indoor spaces
WARRANTY
Subject to any applicable consumer protection legislation, Broan
warrants the HRV unit will be free from defective materials and
workmanship for a 2-year period and also provides a 15-year warranty
on the heat exchange core from the manufacturing date, under
normal use, provided that installation is in accordance with the
instructions in the installation manual.
VB0241
Available at:
Controls
Standards Controls
• Low voltage control circuit for connection of dehumidistat, switches
or timers.
• Terminal block and strain relief bushings are provided for connection
of 115 VAC.
Optional Controls
• VT10W remote wall mounted control, providing Off - Intermittent
- Low - Circulation modes. Includes dehumidistat for high speed
control.
Noise and Vibration Control
• Fan housing are mounted on special vibration isolators and the fan
mouth is cushioned by an Evazote gasket.
• Isolation mounts are supplied for either threaded rod hanging or
oor frame mounting.
VD0072
Circulation
• When a VT10W is integrated for control, the circulation mode will
allow high speed circulation through the supply side for as long as
desired. In this mode the exhaust fan is o and the Frostbuster™
damper shuts o the fresh air from outside. This setting may be
useful during warm seasons, or when air conditioning has been
added to the supply ducting.
Defrost
• Broan Frostbuster™ operates a timed cycle of circulation when
outside supply temperature drops below -5°C (23°F).
• Manual circulation is available with the Pool Plus™ wall control.
Positive Shut-Off of Fresh Air
• By setting the optional remote wall control switch to ‘’O’’, the
outdoor air will be tightly sealed o by the Frostbuster™ damper.
When combined with an exhaust grille with gravity louvers, total
shut-o of outside air during periods of shutdown is possible.
Heat Recovery Core
• Easily removable
• Material: Non corrosive polypropylene UL94V2 rating
• Heat transfer area: 450 ft (42 m)
• Maximum exhaust temperature: 150°F (65°C)
• Warranty: 15 years
Requirements and Standards
• Complies with the CSA C22.2 no. 113 Standard applicable to
ventilators.
• Complies with the UL 1812 - ducted Heat Recovery Ventilators.
3/8˝ Threaded rods and
vibration isolators
Wooden curb with lag screw
BROAN B1600705
Part no. B1600705
from 400 to 700 cfm (0.3 in. w.g.)