Instructions / Assembly

Page 4
MODEL 744FL
SERVICE PARTS
KEY NO. PART NO. DESCRIPTION
1 97014185 Damper / Duct Connector
2 97016382 Housing Assembly
3 98003036 Mounting Bracket (4 req.)
4 98005512 Wiring Adaptor Plate
5 99524804 Blower Wheel *
6 99524805 Motor Bracket / Venturi *
7 99080557 Motor *
97016454 Motor / Motor Bracket Assembly
(includes Key Nos. 6 & 7) *
8 ------------- Receptacle
9 99420551 Plastic Wire Clip
10 98010900 Lamp Bracket
11 ------------- Harness, GU24 Socket
97018937 Lamp Bracket Assembly
(includes Key Nos. 8 thru 11)
12 99524802 Trim Ring / Baffle with Springs
13 99525160 Baffle Springs (2 req.)
14 99271448 Fluorescent Lamp
15 98010583 Electrical Box Cover
99045007A
Order replacement parts by PART NO. - not by KEY NO.
* Lamp Bracket Assembly must be removed to service these
parts.
9. Attach trim ring / baffle to housing.
Remove the cardboard protector from inside the housing collar.
Use a pencil to insert one end of each spring into the holes on the
lamp bracket. Center trim ring / baffle in ceiling opening.
10. Install bulb.
FINISHED
CEILING
MATERIAL
HOUSING
COLLAR
CLEARANCE
HOLE
8. Finish ceiling.
Cut an opening in finished ceiling material for housing collar.
SPRINGS
TRIM RING / BAFFLE
LAMP
BRACKET
CAUTION: Twist bulb to install or remove.
CAUTION - RISK OF FIRE: Use only R30, BR30, or PAR30
shaped, 16W compact fluorescent lamp with GU24 base
(supplied). Replacement bulbs can be ordered from
Broan if not available locally (see service parts list).
!
3
2
8
1
5
9
10
12
11
4
6
7
13
Lamp Bracket Assembly
must be removed to
service these parts.
14
15