Installation Guide

ManualsBrandsBroan ManualsBroan Wall Controls and SwitchesBroan Single Function Rocker Switch - White

ROCKER SWITCH

2. Install at least a 2¾” deep switch box

for 14 AWG wire or at least a 3½”

deep switch box for 12 AWG wire.

3. Connect cables to switch box and

appliance (load) using appropriate

connectors. Provide 6” leads inside

box and appliance and strip ends

5/8”. (Use strip gauge on back of

switch.)

4. Make electrical connections follow-

ing diagram on back. Make sure both

the control and the appliance are

properly grounded.

For side-wiring:

Loop wires clockwise, ¾ turn around

terminal screws and tighten securely.

For push-in wiring: Insert straight

ends of wires into appropriate push-

in wiring holes. Do no insert wires into

release slots.

5. Tuck wires into switch box and fas-

ten the control to box using attached

screws.

6. Fasten the switch plate to the con-

trol using the short screws from the

parts bag.

WARNING

• All electrical work must be done in

accordance with local codes, ordi-

nances, or National Electrical Code

as applicable. FOR SAFETY, THIS

PRODUCT MUST BE GROUNDED.

If you are unfamiliar with methods of

installing electrical wiring, secure the

services of a qualified electrician.

• Turn off power and lock out service

panel before installing, wiring, or ser-

vicing this product.

• To prevent serious injury from elec-

trical shock or damage to electrical

components - DO NOT WIRE HOT!

• Use with copper wire only.

• Warranty void if miswired.

INSTALLATION

1. Turn off power and lock out service

panel before wiring the control.

Summary of content (2 pages)

PAGE 1
ROCKER SWITCH WARNING • All electrical work must be done in accordance with local codes, ordinances, or National Electrical Code as applicable. FOR SAFETY, THIS PRODUCT MUST BE GROUNDED. If you are unfamiliar with methods of installing electrical wiring, secure the services of a qualified electrician. • Turn off power and lock out service panel before installing, wiring, or servicing this product.
PAGE 2
WIRING DIAGRAM WARRANTY TO LOAD WHITE BLACK GROUND BLACK 120 VAC LINE IN BROAN-NUTONE LLC ONE YEAR LIMITED WARRANTY Broan-NuTone LLC warrants to the original consumer purchaser of its products that such products will be free from defects in materials or workmanship for a period of one year from the date of original purchase. THERE ARE NO OTHER WARRANTIES, EXPRESS OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE.