Spec Sheet
REFERENCE QTY. REMARKS Project
Location
Architect
Engineer
Contractor
Submitted by Date
SPECIFICATION SHEET
Broan LLC Hartford, Wisconsin www.broan.com 800-558-1711
FEATURES
GRILLE:
•
White polymeric – blends well with any decor
•
Torsion spring grille mounting - no tools required
•
Metal grille kit available - purchase separately
BLOWER:
•
Plug-in, permanently lubricated motor
•
Broan-designed polymeric blower wheel
•
Snap in/out assembly for easy cleaning - no
screws to drive or drop
HOUSING:
•
Compact, 25 gage galvanized steel, attaches easily
to wall or ceiling joists
•
Double strength mounting flanges with keyhole slots
•
Removable wiring cover - make connections away
from tight corners
•
No electrical knockout to remove
•
Polymeric duct fitting with tapered sleeve for easy,
positive duct connection
•
Quiet polymeric damper prevents cold backdrafts - no
metallic clatter
•
U.L. Listed for use over bathtubs and showers when
connected to a GFCI protected branch circuit (ceiling
mount only).
CONTROLS (purchase separately):
• Refer to the Broan ventilation fan catalog for a
complete line of accessories to effectively adapt this
fan to your construction requirements.
Available only as follows:
•
MODEL 6884H: Project Housing Pack (18 per
carton).
•
MODEL 1688F: Project Finish Pack (6 per carton).
MODEL 6884
CEILING/WALL FAN
SPECIFICATIONS
02B 1102601A
TYPICAL SPECIFICATION
Ventilator shall be Broan Model 6884.
Ventilator shall have galvanized steel housing with
double-strength mounting flanges. It shall be ducted
vertically (horizontally) to a roof cap (wall cap).
Blower assembly shall be removable and permanently
lubricated.
Air delivery shall be no less than 50 CFM and sound
level no greater than 4.0 sones. All air and sound
ratings shall be certified by HVI. Units shall be U.L. Listed.
BB0092
BD0040
HVI-2100 CERTIFIED RATINGS comply with
new testing technologies and procedures
prescribed by the Home Ventilating Institute, for
off-the-shelf products, as they are available to
consumers. Product performance is rated at 0.1
in. static pressure, based on tests conducted in
a state-of-the-art test laboratory. Sones are a
measure of humanly-perceived loudness, based
on laboratory measurements.
MODEL VOLTS AMPS SONES CFM DUCT
6884 120 0.9 4.0 50 4'' Round
product specifications subject to change without notice.
dimensions shown
in inches