Specification Sheet

SPECIFICATION SHEET
Broan-NuTone LLC, 926 West State Street, Hartford, WI 53027 (1-800-637-1453)
REFERENCE QTY. REMARKS Project
Location
Architect
Engineer
Contractor
Submitted by Date
43000 SERIES
RANGE HOOD
Choose this 4-way convertible hood for round
and rectangular ducted, as well as non-ducted
configurations.
FEATURES
• 4-way convertible - can be ducted using 7” round or
3¼” x 10” steel ductwork or installed non-ducted
• Includes 3¼” x 10” damper (7” round – purchase Model
BP87Q damper)
• Max blower airflow: 260†
• 115 V, 60 Hz, 1.8 Amps
• Includes washable aluminum filter with light lens (non-
ducted filter purchased separately)
• Two-speed rocker switch controls fan
• 75-Watt maximum incandescent light controlled by single
rocker switch
• Finished with durable, environmentally friendly, advanced
technology powder coating
• All edges hemmed for safety and strength
• Available in 30” and 36” widths in White-on-White, Black-
on-Black, Biscuit-on-Biscuit, and Stainless Steel finishes
TYPICAL SPECIFICATION
The range hood shall be a Broan 43000 Series.
Hood to be 30” (36”) in width and finished with White (Black)
(Biscuit) powder-coat or constructed of stainless steel. All
exposed edges to be hemmed.
Range hood will be convertible between 7” round, 3¼” x 10”
rectangular (vertical or horizontal), and non-ducted
discharges. A 3¼” x 10” damper to be included.
Hood shall have a washable aluminum filter and covered light.
Incandescent light bulb to be 75 watts maximum.
Range hood to be controlled with two-speed rocker switch
for fan and single rocker switch for light.
See below table for airflow and sound level performances.
Range hood shall be U.L. listed.
02H 99042442E
HVI-2100 CERTIFIED RATINGS comply with new
testing technologies and procedures prescribed
by the Home Ventilating Institute, for off-the-shelf
products, as they are available to consumers. Product
performance is rated at 0.1 in. static pressure, based
on tests conducted in a state-of-the-art test laboratory.
Sones are a measure of humanly-perceived loudness,
based on laboratory measurements.
HVI PERFORMANCE
Duct Orientation Size Damper
Sones CFM
Normal High Normal
High
0.25 in. w.g.
High
0.1 in. w.g.
Vertical - Rectangular 3¼ in. x 10 in. Included 2.0 6.0 100 105 190
Horizontal - Rectangular 3¼ in. x 10 in. Included 2.0* 7.0 90* 105 160
Vertical - Round 7 in. Sold separately 2.0 6.0 130 100 240
† Where noted performance rating is not HVI
certified but was established in accordance
with HVI Standardized test procedure.