Spec Sheet

DUAL EXTERIOR HOOD
INSTALLATION KIT
VR0003
TWO EXTERNAL VENTS IN ONE!
Imagine... Only one hole to cut in the exterior wall to perform an
outside connection for an HRV or ERV. Introducing the simplest way to
perform the outside connection: the Dual Exterior Hood Kit. This kit is
exclusively designed for units which airflow is equal or under 110 CFM,
at 0.4 in. w.g.
• Only one 6” diameter hole in the exterior wall
• Aesthetic white polypropylene dual outside port
• Exclusive Tandem® transition fits both 5” or 6” diameter
insulated flexible ducts
• Hardware included
• Light materials, handy design
• Outside connection performed in half of the time
• Complies with National Building Code of Canada, Ontario Building
Code and CSA F326 requirements
The revolutionary design of the Dual Exterior Hood Kit simplifies the
installation because there is only one hole to cut in the exterior wall. In
fact, every installer knows that locating efficiently one outside port is
easier (and faster) than locating two. And moreover, there is almost no
cross-contamination between the exhaust and intake airflows!
Available at:
Part number: 14690
0.00
0.05
0.10
0.15
0.20
0.25
0 20 40 60 80 100 120
VG0075A
VG0077A
0
0.05
0.10
0.15
0.20
0.25
0 20 40 60 80 100 120
Pressure drops (air intake)
Pressure drops (air exhaust)
Inch water gauge
Air ow (cfm)
INCLUDING THE
TRANSITION
Inch water gauge
Air ow (cfm)